ดาวน์โหลดซอฟต์แวร์ OpenWrt

@Dear Ivan,
Our technical support has sent you the firmware via email. Please check.

“Hello.

I have a Cudy WR3000H V1.0.

Serial number: S000160126…
Current stock firmware: 2.4.5-20250515-105059

I want to install official OpenWrt. Please send the compatible Cudy-signed intermediate firmware to the email address provided with this comment.

Thank you."

@Dear Dmigorg,
Our technical support has contacted you via email. Please check.

“Hello Cudy Support,

Could you please provide a signed OpenWrt intermediate/transition firmware for the Cudy LT700E V1.0, board ID R55?

My device is currently running the official firmware:

LT700E-R55-1.90.0-20240322-120922

I would like to migrate safely from the stock Cudy firmware to OpenWrt using the normal firmware upgrade procedure.

I noticed that signed intermediate OpenWrt firmware is available for several other Cudy models, including the LT700 Outdoor V1.0 (R43). However, my device is the LT700E V1.0 (R55), so the R43 firmware is not compatible.

Could you please provide the corresponding signed intermediate firmware for LT700E V1.0 / R55, or let me know if there is another officially supported method to install OpenWrt on this model?

Thank you!"

Hello,

I have a Cudy WR3000 V1.0.

Serial number starts with: 2549
Current stock firmware: 2.4.19-20250828-192837

I want to install official OpenWrt.

Please send me the latest Cudy-signed OpenWrt intermediate firmware compatible with my WR3000 V1.0.

Thank you.

Hi all,
I have a Cudy AX 3000 (Model M3000 V2).
Current Stock Firmware 2.5.28-20260807-120317
PLEASE, send me the newest updated Cudy-signed OpenWrt intermediate firmware.
Thanks
Sasa

Hello,

I have a Cudy WR3000U-256MB V1.0 router.
SN: S000130126220 EAEU1.0
Current firmware: 2.4.29-20260427-104733

I tried installing official OpenWrt following the standard process:
1. Installed the intermediate firmware cudy_wr3000u-256-v1-sysupgrade.bin from your Google Drive folder — successful.
2. Attempted to flash the official OpenWrt 25.12.5 image for “Cudy WR3000 v1” (device profile cudy,wr3000-v1) from firmware-selector.openwrt.org.

I received this error:
“Device cudy,wr3000u-v1 not supported by this image. Supported devices: cudy,wr3000-v1”

It appears the intermediate firmware identifies my device under a separate profile “cudy,wr3000u-v1” (with a U), while the official OpenWrt image is built for a different profile “cudy,wr3000-v1” (without the U).

Questions:
1. Does my unit’s batch use a different flash memory chip requiring a separate device profile?
2. Is there already a compatible OpenWrt image for the cudy,wr3000u-v1 profile, and where can I download it?
3. If not yet available, when is it expected to be released?

I did not force the flash and safely restored the router to stock firmware via TFTP recovery to avoid damaging the device. The router is currently fully functional on stock firmware.

Thank you for your help.