ดาวน์โหลดซอฟต์แวร์ OpenWrt

Hi and thanks for the reply, however, as previously stated, I’m on firmware version v2.3.8. Should I downgrade to v2.0.0?
Thanks once again

@Jens,
Please try to update the 2.0.0 first, you can download it on the website below.
https://www.cudy.com/pages/download-center/m3000-1-0
The try again.

“Hi,
I bought a 2pc M3000 1.0 kit and I’m trying to flash the devices with OpenWRT.
While initiating the process (Advanced Settings > System > Firmware) with cudy_m3000-v1-sysupgrade.bin, I get the error “Not applicable! Please upload the firmware applicable to the following models.”
I’m on v2.3.8. Please advise.
Thank you.”

Thank you, Cudy and your hard working people, for offering these migration images and compatibility with OpenWRT. I am delighted with my new WR3000S.

Hi,
I bought a 2pc M3000 1.0 kit and I’m trying to flash the devices with OpenWRT.
While initiating the process (Advanced Settings > System > Firmware) with cudy_m3000-v1-sysupgrade.bin, I get the error “Not applicable! Please upload the firmware applicable to the following models.”
I’m on v2.3.8. Please advise.
Thank you.

@Steve
Hi Steve,

OK. I have uploaded it to the Google Drive.

“Dear Cudy team,
thanks for providing the migration image for the M1200. It works as expected.
Can you please upload it to the Google drive?
Remarks if someone uses it:
- The image can be flashed from the OEM web interface while the device is connected to the LAN port (lower port)
- After flashing the migration image, connect the LAN cable to the WAN port (upper port)
- OpenWrt is now accessible via http://192.168.1.1
- A official OpenWrt image can be flashed now
- After flashing the official OpenWrt image, connect the LAN cable to the LAN port (lower port)
- OpenWrt is now accessible via http://192.168.1.1

Best Regards
Steve"