ดาวน์โหลดซอฟต์แวร์ OpenWrt

Dear Support,
Trying to flash OpenWRT on M1300 v2. Whenever I flash the intermediate firmware from G Drive, using WebGUI>Firmware, it flashes and reboots. But then I cant reach the device, neither via LAN nor WiFi. Only the white(or bluish) led is on after reboot, and stalls in that state kind of being bricked.
The only way back was to push latest Cudy firmware via tftpd64.

Tried more than several times, and if this helps, sometimes the device downloads the firmware from tftpd immediately, which is like, sometimes it reboots into a ‘firmware download’ state, I guess.

What am i missing, why would you think the device stalling after the regular method?

Thanks,

I am wanting to flash openWRT onto an AP3000 however I can’t see an option for the device on the google drive link. Is there a version for the AP3000? Thanks

Добрый день, нужна прошивка OpenWrt для CUDY LT500D, можете выслать? Либо прошивка для разблокировки подписи, чтоб попробовать собрать свой OpenWRT.

@GRZEGORZ ANDRZEJCZYK,
Cudy routers don’t support to set the WiFi speed when working on official firmware, If you have updated the OpenWrt firmware of the router, you can try to find it on the web page.
Or you can just change the WiFi mode, such as 802.11b and 802.11 a to working on a lower speed.

“It loaded fine and I made a bridge between the fishing sonar and the phone. I just don’t know how, reduce the wifi speed to 1Mbit or 6Mbit to have better range?”

It loaded fine and I made a bridge between the fishing sonar and the phone. I just don’t know how, reduce the wifi speed to 1Mbit or 6Mbit to have better range?