คำเตือน
หน้าเว็บนี้แสดงรายการซอฟต์แวร์ของอุปกรณ์ที่รองรับระบบ OpenWrt ก่อนที่จะดาวน์โหลดและติดตั้งซอฟต์แวร์ โปรดทราบว่า OpenWrt Project เป็นระบบปฏิบัติการ Linux ที่กำหนดเป้าหมายไปที่อุปกรณ์ฝังตัว แทนที่จะพยายามสร้างเฟิร์มแวร์แบบคงที่เพียงตัวเดียว OpenWrt มอบระบบไฟล์ที่สามารถเขียนได้อย่างสมบูรณ์พร้อมการจัดการแพ็คเกจ ซึ่งช่วยให้คุณไม่ต้องเลือกแอปพลิเคชันและการกำหนดค่าที่ผู้จำหน่ายให้มา และช่วยให้คุณปรับแต่งอุปกรณ์ผ่านการใช้แพ็คเกจเพื่อให้เหมาะกับแอปพลิเคชันใดๆ สำหรับนักพัฒนา OpenWrt เป็นเฟรมเวิร์กสำหรับสร้างแอปพลิเคชันโดยไม่ต้องสร้างเฟิร์มแวร์ที่สมบูรณ์ สำหรับผู้ใช้ นี่หมายถึงความสามารถในการปรับแต่งได้อย่างเต็มที่ เพื่อใช้อุปกรณ์ในแบบที่ไม่เคยคิดมาก่อน
คำอธิบาย
- ไฟล์นี้สามารถใช้ได้เมื่อเราเตอร์ของคุณทำงานภายใต้ Cudy web UI เท่านั้น
- หากเราเตอร์ทำงานภายใต้ OpenWRT UI อยู่แล้ว ผู้ใช้ควรคืนค่าเป็นเฟิร์มแวร์อย่างเป็นทางการของ Cudy ก่อน จากนั้นอัปเกรดเราเตอร์ด้วยเฟิร์มแวร์นี้
- จะคืนค่าเราเตอร์เป็นเฟิร์มแวร์อย่างเป็นทางการของ Cudy ได้อย่างไร โปรดอ่าน readme ในไฟล์ที่ดาวน์โหลด
การรับประกัน:
คิวดี้ขอประกาศ
- เรา Cudy ไม่รับประกันซอฟต์แวร์ใด ๆ ที่ไม่ได้เผยแพร่โดย Shenzhen Cudy Technology Co., Ltd.
- เราไม่รับประกันใด ๆ สำหรับผลิตภัณฑ์ที่ติดตั้งซอฟต์แวร์ใด ๆ ที่ไม่ได้เผยแพร่โดย Shenzhen Cudy Technology Co., Ltd.
- หากคุณต้องการใช้ซอฟต์แวร์ openwrt เราขอแนะนำให้คุณดาวน์โหลดจากเว็บไซต์อย่างเป็นทางการของ Cudy
ดาวน์โหลดเฟิร์มแวร์ OpenWrt เพื่อลบการตรวจสอบลายเซ็น: ไดรฟ์
เครื่องมือค้นหาเฟิร์มแวร์ OpenWrt (ไม่เผยแพร่โดย Cudy): ตัวเลือกเฟิร์มแวร์ OpenWrt
1319 ความคิดเห็น
@Dear Connect,
Did you unzip the firmware before update?
“Hello,
I have recently purchased the C200P controller, the SN starts with 2531. I would like to use it just as a router with the ability to do Vlans, hence I tried to flash it with OpenWrt. I followed the instructions everywhere with the 2 step (intermediary first then OpenWrt) but the device is not even accepting the intermediary flash that i downloaded and unzipped following the link to the google drive files, instead I get: “File is not compatible with the device model(s).” I have tried with multiple browsers also!
Current firmware on the C200P is 2.4.7 (11-Feb-2026)
Any ideas?
Kind regards.”
@Dear ali,
Sorry to tell you that there is no OpenWrt firmware for LT18 currently. The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
“hello is the openwrt for cudy lt18 ax 1800 please ? or i just want to install v2ray vpn in my router”
@Уважаемый Вадимка,
AP3000 поддерживает функцию VLAN SSID после обновления до последней версии прошивки. А AP3000D — нет. Кроме того, вы можете обновить прошивку AP3000 до OpenWrt. Существуют промежуточные и стандартные прошивки OpenWrt для AP3000.
“ap3000 ap3000d очень нуждаются в OpenWrt, вроде позиционируют себя как точки доступа а даже банальной работы с vlan нет, поправьте пожалуйста”
@Dear Hasan,
Sorry to tell you that there is no OpenWrt firmware for WR1500 currently.
“Cudy wr1500 need firmware”
Hello,
I have recently purchased the C200P controller, the SN starts with 2531. I would like to use it just as a router with the ability to do Vlans, hence I tried to flash it with OpenWrt. I followed the instructions everywhere with the 2 step (intermediary first then OpenWrt) but the device is not even accepting the intermediary flash that i downloaded and unzipped following the link to the google drive files, instead I get: “File is not compatible with the device model(s).” I have tried with multiple browsers also!
Current firmware on the C200P is 2.4.7 (11-Feb-2026)
Any ideas?
Kind regards.