ดาวน์โหลดซอฟต์แวร์ OpenWrt

Hello,

Like many happy TR3000 owners I embarked on the journey to flash the new toy with Cudy’s temperary OpenWrt firmware that helps removing signature check down the road. Download and unzip worked well, but Firmware Upgrade failed with error “File is invalid. Please retry.
Uploaded File: cudy_tr3000-v1-sysupgrade.bin
Size: 12.63 MB (13241929 B)
MD5: b8333d8eebd067fcb43bec855ac22364”

Firmware Version 2.3.9-20250208-171917
Hardware TR3000 256MB FLASH V1.0

Thanks

Hi again, I’ve recovered the router. Now can you send me the correct Firmware to Remove Signature Check for WR3000 to work as an access point?

@Dear Omar,
The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware. Thanks!

“Hello

I need a Firmware to Remove Signature Check for WR1500

I would like to develop an openwrt for it?

I hope if you can send to me the file via my email

Regards"

@Dear Filippo,
Our technical support has sent you the firmware via email. Please check.
“Hi I’ve an AP3000 celling mount, but I cannot find any fw to port me to openwrt please help me Model AP3000 2,5G EU1.0”

@Dear Vasilis,
Please refer to this article on the website to recover the router.
https://www.cudy.com/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware?pos=1&_sid=6290d8065&ss=r
“Hi, i’ve got the WR3000 which I use it as an access point. The only file(Firmware to Remove Signature Check) in Drive is the one without recovery. After installing it everything stopped working. No access to router and the ip of the router doesn’t ping. On my main router’s list of connected devices, before the above firmware’s installation, Cudy was showing but after it shows “OpenWrt”.It seems something stuck.
Pls send me the correct file with the recovery file with it.”