ดาวน์โหลดซอฟต์แวร์ OpenWrt

คำเตือน

หน้าเว็บนี้แสดงรายการซอฟต์แวร์ของอุปกรณ์ที่รองรับระบบ OpenWrt ก่อนที่จะดาวน์โหลดและติดตั้งซอฟต์แวร์ โปรดทราบว่า OpenWrt Project เป็นระบบปฏิบัติการ Linux ที่กำหนดเป้าหมายไปที่อุปกรณ์ฝังตัว แทนที่จะพยายามสร้างเฟิร์มแวร์แบบคงที่เพียงตัวเดียว OpenWrt มอบระบบไฟล์ที่สามารถเขียนได้อย่างสมบูรณ์พร้อมการจัดการแพ็คเกจ ซึ่งช่วยให้คุณไม่ต้องเลือกแอปพลิเคชันและการกำหนดค่าที่ผู้จำหน่ายให้มา และช่วยให้คุณปรับแต่งอุปกรณ์ผ่านการใช้แพ็คเกจเพื่อให้เหมาะกับแอปพลิเคชันใดๆ สำหรับนักพัฒนา OpenWrt เป็นเฟรมเวิร์กสำหรับสร้างแอปพลิเคชันโดยไม่ต้องสร้างเฟิร์มแวร์ที่สมบูรณ์ สำหรับผู้ใช้ นี่หมายถึงความสามารถในการปรับแต่งได้อย่างเต็มที่ เพื่อใช้อุปกรณ์ในแบบที่ไม่เคยคิดมาก่อน

คำอธิบาย

  1. ไฟล์นี้สามารถใช้ได้เมื่อเราเตอร์ของคุณทำงานภายใต้ Cudy web UI เท่านั้น
  2. หากเราเตอร์ทำงานภายใต้ OpenWRT UI อยู่แล้ว ผู้ใช้ควรคืนค่าเป็นเฟิร์มแวร์อย่างเป็นทางการของ Cudy ก่อน จากนั้นอัปเกรดเราเตอร์ด้วยเฟิร์มแวร์นี้
  3. จะคืนค่าเราเตอร์เป็นเฟิร์มแวร์อย่างเป็นทางการของ Cudy ได้อย่างไร โปรดอ่าน readme ในไฟล์ที่ดาวน์โหลด

การรับประกัน:

คิวดี้ขอประกาศ

  1. เรา Cudy ไม่รับประกันซอฟต์แวร์ใด ๆ ที่ไม่ได้เผยแพร่โดย Shenzhen Cudy Technology Co., Ltd.
  2. เราไม่รับประกันใด ๆ สำหรับผลิตภัณฑ์ที่ติดตั้งซอฟต์แวร์ใด ๆ ที่ไม่ได้เผยแพร่โดย Shenzhen Cudy Technology Co., Ltd.
  3. หากคุณต้องการใช้ซอฟต์แวร์ openwrt เราขอแนะนำให้คุณดาวน์โหลดจากเว็บไซต์อย่างเป็นทางการของ Cudy

ดาวน์โหลดเฟิร์มแวร์ OpenWrt เพื่อลบการตรวจสอบลายเซ็น: ไดรฟ์

เครื่องมือค้นหาเฟิร์มแวร์ OpenWrt (ไม่เผยแพร่โดย Cudy): ตัวเลือกเฟิร์มแวร์ OpenWrt 

กลับไปยังบล็อก

1536 ความคิดเห็น

@Dear Cudy team,

I bought your router:

TR3000_ZH V1.0
SN: TR3000255001964

Firmware Version: 24.21-20251009-115734
Model: TR3000
Hardware: TR3000 256MB FLASH V1.0

I want to install OpenWrt on it.
As I understand it, first an intermediate firmware is installed, and then OpenWrt?

Could you tell me where I can download the intermediate firmware (or the exact name on Google Drive, or please provide a link) and the correct version of OpenWrt, so I don’t brick the router.

Unfortunately, searching online only gives contradictory options, with the risk of turning the router into a brick.

Your tech support (support.ru@cudy.com), as I understand it, is very busy with their own affairs and directs me to search your website instead of providing specific information.

Therefore, I ask for help here. I don’t want to end up with a brick, and I haven’t been able to find clear information.

Thanks in advance.

Ilya

I got wr3000 V1,
s/n wr300025270…
I tried to flash openwrt-ramips-mt76x8-cudy_wr300-squashfs-flash.bin (from wr3000 V1 zip from Google drive space) by Cudy GUI.
I got an error. “File is invalid. Please retry”

Any advice?

tg

@Dear Adorfer,
Our technical support has sent you the firmware via email. Please check.

“where do i find the Openwrt intermediate Firmware (Cudy signed) for
AP3000v1 (AX3000 ceiling mount EU1.0)?
I tried different versions (wall/outdoor) from your google drive without success (e.g. AP3000v1-wall, AP3000-outdoor). If it’s there, please indicate the filename.
Updating the AP3000V1 from 1.1.6.4 to 2.4.6 before didn’t help either.”

Support

@Dear Mehdi,
There is no OpenWrt firmware for LT500 currently.

“I need to open ssh on cudy Lt500
I could not find any image for that”

Support

where do i find the Openwrt intermediate Firmware (Cudy signed) for
AP3000v1 (AX3000 ceiling mount EU1.0)?
I tried different versions (wall/outdoor) from your google drive without success (e.g. AP3000v1-wall, AP3000-outdoor). If it’s there, please indicate the filename.
Updating the AP3000V1 from 1.1.6.4 to 2.4.6 before didn’t help either.

Adorfer

แสดงความคิดเห็น