ดาวน์โหลดซอฟต์แวร์ OpenWrt

Hello,

I recently purchased a Cudy RE3000 and I am trying to download the firmware from your Google Drive folder:

https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj?usp=sharing

However, both Google Drive’s virus scanner and Microsoft Defender flag the RE3000 firmware file as potentially unsafe.

Could you please check this issue and confirm whether the file is safe to use? If possible, please also provide a clean download link and the official checksum for the firmware file.

Thank you.

@Dear Emamul,
M3000 1.0_2.0.zip is the correct one. Please unzip and update it.

“Hello, I have a Cudy M3000 V2 (EU 2.0) with firmware 2.5.10 and the new YT8821 hardware variant. The Google Drive linked from your OpenWrt page only contains M3000 1.0_2.0.zip with a V1 sysupgrade image. Could you please send me the latest Cudy-signed OpenWrt intermediary firmware for the M3000 V2 YT8821 so I can install official OpenWrt?”

Hello, I have a Cudy M3000 V2 (EU 2.0) with firmware 2.5.10 and the new YT8821 hardware variant. The Google Drive linked from your OpenWrt page only contains M3000 1.0_2.0.zip with a V1 sysupgrade image. Could you please send me the latest Cudy-signed OpenWrt intermediary firmware for the M3000 V2 YT8821 so I can install official OpenWrt?

@Dear IURII,

Do you install mesh system with other Cudy routers? If yes, you can reset the router to factory default. Do not install mesh system with other Cudy routers. Then update it again.

“Hello,

I have a Cudy WR3000P V1.0 (EU).

Current firmware:
2.4.22-20251125-101108

Serial Number:
S0001005261700095

When I try to install the OpenWrt intermediate firmware
cudy_wr3000p-v1-sysupgrade_20251119.bin
(downloaded from the OpenWrt Software Download page),
the router rejects it with the message:

“Invalid file. Please try again.”

Could you please provide the correct intermediate firmware
for this hardware revision and firmware version?

Thank you."

Hello,

I have a Cudy WR3000P V1.0 (EU).

Current firmware:
2.4.22-20251125-101108

Serial Number:
S0001005261700095

When I try to install the OpenWrt intermediate firmware
cudy_wr3000p-v1-sysupgrade_20251119.bin
(downloaded from the OpenWrt Software Download page),
the router rejects it with the message:

“Invalid file. Please try again.”

Could you please provide the correct intermediate firmware
for this hardware revision and firmware version?

Thank you.