จะอัพเกรดเฟิร์มแวร์ของ Cudy Router ได้อย่างไร?

1. ดาวน์โหลดเฟิร์มแวร์ล่าสุดจากศูนย์ดาวน์โหลด


2. แตกไฟล์ที่คุณดาวน์โหลด


3. เปิดอุปกรณ์ Cudy รอให้ไฟ LED ติดค้าง


4. เชื่อมต่อกับเครือข่ายของ Cudy ผ่าน WiFi หรืออีเธอร์เน็ต


5. เปิดเว็บเบราว์เซอร์แล้วไปที่ http://cudy.net หรือ http://192.168.10.1

สำหรับรายละเอียด โปรดดูที่วิธีลงชื่อเข้าใช้เว็บอินเทอร์เฟซของ Cudy Router


6. อัปเกรดเฟิร์มแวร์

ก. การตั้งค่าขั้นสูง -> เฟิร์มแวร์ เลือกเฟิร์มแวร์ที่คุณคลายซิปเพื่ออัปโหลด

 

ข. หน้า การตั้งค่าทั่วไป->เฟิร์มแวร์ สามารถอัปเกรดออนไลน์และอัปเดตในเครื่องได้

หมายเหตุ: รองรับเฉพาะเฟิร์มแวร์ 2.x.x หรือสูงกว่าเท่านั้น


7. รอ 5 นาทีเพื่อให้เราเตอร์รีสตาร์ท

กลับไปยังบล็อก

181 ความคิดเห็น

@Estimado Snheider:
Intente cambiar el navegador web para actualizar el router. Le sugiero que utilice Chrome o Edge.
Si sigue sin funcionar, pruebe con otro ordenador.

“Ya e intentado 2 veces actualizar mi router ax1500, una vez que hago todo los paso, se cae la conexión a internet hasta que lo apagó, cuando lo enciendo todo normal pero en la misma versión que estaba”

Support

Firmware EU 1.0 (Official .bin)

Ahmed1998

Ya e intentado 2 veces actualizar mi router ax1500, una vez que hago todo los paso, se cae la conexión a internet hasta que lo apagó, cuando lo enciendo todo normal pero en la misma versión que estaba

Snheider

@Dear Sakis,
Please try to change the web browser to update the router. I suggest the chrome or edge.
If still fail, please try to change a computer.

“It is impossible to update the Cudy WR1500 that I bought.
I follow the instructions exactly. I am sure that I am not doing anything wrong.
I try to install the intermediate—L101-1.0.4-20241205-747393-mid-flash.bin first, it tells me that the installation is successful, I wait 3 minutes and then… the led flashes once blue and once red.
I turn off the power, turn it back on after a minute, it works again but the intermediate update is not installed so it does not recognize the latest update 2.3.10”

Support

It is impossible to update the Cudy WR1500 that I bought.
I follow the instructions exactly. I am sure that I am not doing anything wrong.
I try to install the intermediate—L101-1.0.4-20241205-747393-mid-flash.bin first, it tells me that the installation is successful, I wait 3 minutes and then… the led flashes once blue and once red.
I turn off the power, turn it back on after a minute, it works again but the intermediate update is not installed so it does not recognize the latest update 2.3.10

Sakis

แสดงความคิดเห็น