จะติดตั้งเราเตอร์ Cudy 4G LTE ได้อย่างไร?

การเตรียมการ:

1. ติดตั้งเสาอากาศและวางตำแหน่งขึ้นด้านบน

2. ใส่ซิมการ์ดลงในช่องจนกว่าจะได้ยินเสียงคลิก

3. เชื่อมต่ออะแดปเตอร์จ่ายไฟกับเราเตอร์แล้วเปิดเครื่อง

ขั้นตอนที่ 1:

เปิดเว็บเบราว์เซอร์แล้วไปที่ http://cudy.net หรือ http://192.168.10.1 ป้อนรหัสผ่านผู้ดูแลระบบเพื่อเข้าสู่ระบบ

หมายเหตุ: รหัสผ่านผู้ดูแลระบบเริ่มต้นคือ "ผู้ดูแลระบบ" หากเวอร์ชันเฟิร์มแวร์คือ 1.X.X เราได้ลบรหัสผ่านผู้ดูแลระบบเริ่มต้นตั้งแต่เฟิร์มแวร์เวอร์ชัน 2.X.X คุณต้องตั้งรหัสผ่านผู้ดูแลระบบเมื่อเข้าสู่ระบบครั้งแรก

สำหรับรายละเอียด โปรดดูที่จะเข้าสู่เว็บอินเตอร์เฟสของ Cudy Router ได้อย่างไร

ขั้นตอนที่ 2: หน้าต่างการตั้งค่าด่วนจะปรากฏขึ้น เลือก 'เขตเวลา'

ขั้นตอนที่ 3: กำหนดค่าพารามิเตอร์  APN โดยส่วนใหญ่เราเพียงต้องการเก็บโปรไฟล์ APN ไว้เป็น " อัตโนมัติ" จากนั้นคลิก "ถัดไป" เราเตอร์จะเลือกพารามิเตอร์ APN โดยอัตโนมัติ (แนะนำ)

หากคุณต้องการปรับแต่งพารามิเตอร์ APN คุณสามารถเลือกโปรไฟล์ APN เป็น " ด้วยตนเอง" และป้อนพารามิเตอร์ APN ที่ถูกต้อง 

หมายเหตุ: หากคุณไม่แน่ใจเกี่ยวกับพารามิเตอร์ APN โปรดติดต่อผู้ให้บริการอินเทอร์เน็ตของคุณ

ขั้นตอนที่ 4: เปลี่ยนชื่อเครือข่ายไร้สายและรหัสผ่านหรือคงไว้เป็นค่าเริ่มต้น

ขั้นตอนที่ 5: คลิก "บันทึกและนำไปใช้" เพื่อกำหนดค่าให้เสร็จสมบูรณ์

ขั้นตอนที่ 6: เมื่อสถานะเชื่อมต่อแล้ว คุณจะเพลิดเพลินกับอินเทอร์เน็ตได้

 

 

กลับไปยังบล็อก

52 ความคิดเห็น

@Dear bellad,
OK, Sorry to hear that. We will try our best to improve the product and hope you can have a better shopping experience in the future.

“hello , same with spi disable , i’ve reset factory and tried with 192.168.10.1 and camera 192.168.10.12 gateway 192.168.10.1 , same , i return the LT300 by amazon , I don’t need it anymore”

Support

hello , same with spi disable , i’ve reset factory and tried with 192.168.10.1 and camera 192.168.10.12 gateway 192.168.10.1 , same , i return the LT300 by amazon , I don’t need it anymore

bellad

@Dear bellad,
Please try to disable the SPI Firewall on “Advanced Settings” page and try again.

“hello , the camera has gateway 192.168.8.1 . I tried with Gl MT300N of gl inet ,with the same IP addresses it’s ok
if I could use SSH ,I’ll see what’s wrong”

Support

hello , the camera has gateway 192.168.8.1 . I tried with Gl MT300N of gl inet ,with the same IP addresses it’s ok
if I could use SSH ,I’ll see what’s wrong

bellad

@Dear bellad,
Please check if the camera has correct gateway IP address 192.168.8.1?
“on lt300 v3 i remplace 192.168.10.1 by 192.168.8.1 , 4g lte > ok , openvpn > ok , i have access a web page of config by vpn , i have plug camera in lan rj45 with 192.168.8.12 , i not access camera , why ??”

Support

แสดงความคิดเห็น