เมื่อเร็วๆ นี้ เราได้รับข้อเสนอแนะว่าเราเตอร์ของเราไม่สามารถทำงานอย่างถูกต้องกับ T-Mobile ได้ เช่น ไม่มีอินเทอร์เน็ตหรือสามารถรับอินเทอร์เน็ต IPv6 ได้เท่านั้น เป็นต้น เราได้สร้างเฟิร์มแวร์เบต้าเพื่อแก้ไขและปรับปรุงประสิทธิภาพ
ขั้นตอนที่ 1: เปิดเว็บเบราว์เซอร์แล้วไปที่ http://cudy.net หรือ http://192.168.10.1 ป้อนรหัสผ่านเพื่อเข้าสู่ระบบ
สำหรับรายละเอียด โปรดดูที่ วิธีลงชื่อเข้าใช้เว็บอินเทอร์เฟซของ Cudy Router
ขั้นตอนที่ 2: ไปที่การตั้งค่าขั้นสูง->เฟิร์มแวร์ เพื่อ อัปเกรดเฟิร์มแวร์เบต้าด้านล่าง
เฟิร์มแวร์ LT18: ดาวน์โหลดซอฟต์แวร์ Cudy LT18
เฟิร์มแวร์ LT450
V1 (ไมโครซิมการ์ด): LT450-R9-1.15.5beta-20221121-180014-flash.bin
V2 (นาโนซิมการ์ด): ดาวน์โหลดซอฟต์แวร์ Cudy LT450
เฟิร์มแวร์ LT500
V1 (ไมโคร SIM การ์ด): LT500-R9-1.15.5beta-20221121-180014-flash.bin
V2 (นาโนซิมการ์ด): ดาวน์โหลดซอฟต์แวร์ Cudy LT500
เฟิร์มแวร์ LT500D
V2 (นาโนซิมการ์ด): ดาวน์โหลดซอฟต์แวร์ Cudy LT500D
ขั้นตอนที่ 3: การตั้งค่าขั้นสูง-> IPv6 เพื่อเปิดใช้งาน IPv6 บันทึก & ใช้
ขั้นตอนที่ 4: ไปที่ การตั้งค่าขั้นสูง -> TTL -> กำหนดเอง และตั้งค่า TTL เป็น 65, HL เป็น 65.
ขั้นตอนที่ 5: ไปที่การตั้งค่าทั่วไป->4G/Cellular.
1. ตั้งค่าโหมดเครือข่ายเป็น 4G เท่านั้น
2. ตั้งค่าโปรไฟล์ APN เป็นด้วยตนเอง
3. ตั้งค่า APN เป็น fast.t-mobile.com (หมายเหตุ: สำหรับแผน IP แบบคงที่ ให้ตั้งค่า APN เป็น b2b.static)
4. เว้นว่าง ชื่อผู้ใช้ และ รหัสผ่าน
5. ตั้งค่าการตรวจสอบสิทธิ์เป็น PAP+CHAP
หมายเหตุ: สำหรับ APN คุณจะต้องยืนยันอีกครั้งเนื่องจากอาจมีการเปลี่ยนแปลงโดยไม่ต้องแจ้งให้ทราบ

ขั้นตอนที่ 6: บันทึก & สมัครรอประมาณ 5 นาที แล้วตรวจสอบการเชื่อมต่อ หากยังคงใช้งานไม่ได้ โปรดติดต่อ support@cudy.com พร้อมไฟล์ Diagnosis bin (เครื่องมือวินิจฉัย->การวินิจฉัย->GO->ดาวน์โหลด)
42 ความคิดเห็น
@Trey Jones,
Our technical support has sent you the solutions via email. Please check.
“Where are the links?”
Where are the links?
@Alex,
Our technical support has contact you via email. Please check.
“Dear Cudy Team,
I wanted to share my experience regarding the latest firmware for the LT500 V2. I had been using version LT500V2-R25-1.14.26-20220801-152148 for some time without any issues. Recently, I upgraded to the latest firmware version, LT450-LT500-LT500DV2-R25-2.1.1-20240419-090237."
@Rebecca,
Thank you for contacting Cudy support team. You can download the firmware on the website. https://www.cudy.com/pages/download-center/lt500-2-0
But for now, there is no OpenWRT firmware on OpenWRT forum. So I think you can’t update the router to the OpenWRT firmware.
“I own a Cudy LT-500 v 2.0 router amd am requesting the latest beta version of the firmware for this router as well as the latest releases of all applicable software necessary to install OpenWRT on this device. None of the listed download links referenced in FAQ are accessible. Thank you in advance.”
Dear Cudy Team,
I wanted to share my experience regarding the latest firmware for the LT500 V2. I had been using version LT500V2-R25-1.14.26-20220801-152148 for some time without any issues. Recently, I upgraded to the latest firmware version, LT450-LT500-LT500DV2-R25-2.1.1-20240419-090237.
After using version 2.1.1 for about a month on the T-Mobile network, I began experiencing frequent disconnects from the cellular network, usually several times per day. To address this, I have rolled back to version 1.15.28-20230410-094349 and will monitor if the problems continue.
I wanted to report this issue regarding version 2.1.1 and provide feedback. Thank you for continuing to create excellent routers!