1. Скачайте последнюю версию прошивки из центра загрузок.
2. Разархивируйте скачанный файл.
3. Включите устройство Cudy и дождитесь, когда начнёт непрерывно гореть индикатор.
4. Подключитесь к сети устройства Cudy по Wi-Fi или по кабелю Ethernet.
5. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
6. Обновите прошивку.
Способ А. Перейдите в раздел Дополнительные настройки 🡢 Прошивка и выберите файл, который вы извлекли из ранее скачанного архива.
Способ Б. Перейдите в раздел Общие настройки 🡢 Прошивка и обновите прошивку через интернет или выберите локальный файл.
7. Подождите около пяти минут, пока роутер перезагрузится.
Комментариев: 189
@Dear Luis,
Our technical support has sent you the firmware via email. Please check.
“Hi, is possible the last firmware for LT400 EU V1.0 version?.
Tnx!”
Hi, is possible the last firmware for LT400 EU V1.0 version?.
Tnx!
@Dear STEVE,
Thank you for you feedback. We will follow it.
“Hi Cudy Team,
This is a follow-up to my previous report on system-wide reboots on the Cudy P5 (R21) at 802.11ax channel widths of 80 MHz and 160 MHz.
After analyzing the syslog I identified two additional root causes:
1. fw_version: 0×250902ab → WLAN.HK.2.5.0.9, built 2021-06-18 — nearly 5 years old
2. board_id: 0xff → P5-specific BDF not loaded, using generic calibration profile
Both issues have been reported to Cudy support. Stable only at 40 MHz channel width until firmware is updated.""
Hi Cudy Team,
This is a follow-up to my previous report on system-wide reboots on the Cudy P5 (R21) at 802.11ax channel widths of 80 MHz and 160 MHz.
After analyzing the syslog I identified two additional root causes:
1. fw_version: 0×250902ab → WLAN.HK.2.5.0.9, built 2021-06-18 — nearly 5 years old
2. board_id: 0xff → P5-specific BDF not loaded, using generic calibration profile
Both issues have been reported to Cudy support. Stable only at 40 MHz channel width until firmware is updated."
@Dear Dante Salvetti,
Our technical support has sent you the latest firmware via email. Please check.
“Good morning. I have an LT400 EU V1.0 router, firmware version 1.7.4-20210303-112556.
I can’t update the firmware to a later version, either via Wi-Fi or LAN. What can I do? I might need a compatible firmware. Could you send it to me? Thank you. Dante Salvetti”