Примечание. Если устройство работает в режиме Точка доступа, гостевая сеть будет недоступна.
Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Перейдите в раздел Дополнительные настройки 🡢 Гостевая сеть.
Шаг 3. Создайте гостевую сеть. По умолчанию гостевые сети Cudy не защищены паролем и называются Cudy-Guest-2.4G или Cudy-Guest-5G.
Шаг 4. Установите для параметра Шифрование значение WPA-PSK/WPA2-PSK (смешанный режим) и создайте пароль.
Шаг 5. Нажмите на кнопку Сохранить и применить. Гостевая сеть создана!
Комментариев: 88
@Antti
Dear Customer,
Thank you for contacting Cudy support team.
Thank you for your kindly advice, We will provide feedback to the R&D department for evaluation.
“Guest network for AP-mode is really must have for me. Your competitors already have this option. I am already looking for options to replace my current system with a new one that supports multiple ssids.”
Guest network for AP-mode is really must have for me. Your competitors already have this option. I am already looking for options to replace my current system with a new one that supports multiple ssids.
@David
Dear Customer,
Thank you for contacting Cudy support team.
For now, Cudy product doesn’t support guest network when working on Access Point mode. We have plan to develop this feature in near future, please wait patiently.
“Access point without guest network just for home use , so here in Europe much better to use tplink at same price”
Access point without guest network just for home use , so here in Europe much better to use tplink at same price
@Kevin,
Dear Customer,
Thank you for contacting Cudy support team. Our technical support has contacted you via email. Please check.
“Setup AX3000 mesh, 1 x router mode, 5 x mesh.
All connected via ethernet.
LAN and WLAN works as expected, for main network, all mesh units working via wifi and wired lan connected devices.
Issue: Guest Network only connects when device placed next to main router, does not connect when connecting to mesh units.
Tried with and without encryption, does not seem to be getting connections via mesh units, ssid signal, but not device authentication or connection allowed.”