Перед настройкой убедитесь, что у роутера внешний IP-адрес WAN, в противном случае пробросить порты будет невозможно. Если вместо внешнего IP-адреса WAN используется внутренний IP-адрес WAN, обратитесь за помощью к своему интернет-провайдеру. Чтобы проверить, внешний на роутере IP-адрес WAN или внутренний, перейдите в раздел Состояние системы 🡢 WAN 🡢 Состояние или Состояние системы 🡢 Моб. связь 🡢 Состояние. Если напротив параметров Внешний IP-адрес и IP-адрес указан один и тот же IP-адрес, значит используется внешний IP-адрес WAN и можно настроить проброс портов.
Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Перейдите в раздел Дополнительные настройки 🡢 Проброс портов.
Шаг 3. Нажмите Добавить, чтобы добавить в список новую запись. Введите в поля нужные значения.
Шаг 4. Нажмите кнопку Сохранить и применить, чтобы сохранить изменения. Готово!
Комментариев: 42
博主，你好！
最近使用tr3000路由器使用ipv6时测试端口转发，发现无法映射到内网ipv4地址，请问有解决办法吗？
@Dear Yuri,
Our technical support has contacted you via email. Please check.
“I eagerly awaited a response from someone who could help me with the problem I described… I followed your instructions and set up the ZeroTier network. But it doesn’t solve my problem!
The host I want to connect to via RDP does not have the ZeroTier network client – Windows 8.1. I installed different versions from 1.6.6 to 1.8.8, but the network on the host did not start (the firewall is disabled).
Perhaps to connect from my host (with ZeroTier), I only need one rule in the routing on the cudy 3600 router located in ZeroTier, and/or to create a bridge?”
I eagerly awaited a response from someone who could help me with the problem I described… I followed your instructions and set up the ZeroTier network. But it doesn’t solve my problem!
The host I want to connect to via RDP does not have the ZeroTier network client – Windows 8.1. I installed different versions from 1.6.6 to 1.8.8, but the network on the host did not start (the firewall is disabled).
Perhaps to connect from my host (with ZeroTier), I only need one rule in the routing on the cudy 3600 router located in ZeroTier, and/or to create a bridge?
@Dear Yuri,
You can add Routing rules on the Zerotier Management console page to meet you requirement. Please refer to this article on the website.
http://cudy.com/blogs/faq/how-to-remote-connect-cudy-router-via-zerotier?pos=1&_sid=33968118a&ss=r
“There is a Zerotier network with one host and one router. Physically, they are located in different networks with different providers behind grey IPs. How can I redirect an RDP connection on the router to another host that does not have Zerotier and is located in the same local network as the router?”
There is a Zerotier network with one host and one router. Physically, they are located in different networks with different providers behind grey IPs. How can I redirect an RDP connection on the router to another host that does not have Zerotier and is located in the same local network as the router?