Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Откроется окно Быстрой настройки. Выберите режим WISP и нажмите кнопку Далее.
Шаг 3. Выберите свой часовой пояс.
Шаг 4. Выберите основную сеть, которую надо расширить, и нажмите кнопку Подключиться.
Либо перейдите в раздел Общие настройки 🡢 WISP и нажмите кнопку Включить, затем выберите основную сеть, которую надо расширить.
Шаг 5. Введите пароль основной сети.
Шаг 6. Оставьте имя и пароль сети Wi-Fi по умолчанию или измените их.
Шаг 7. Нажмите кнопку Сохранить и применить, чтобы завершить настройку.
Шаг 8. Дождитесь завершения перезагрузки. Готово!
Комментариев: 120
My setup is the same as the photo in this guide
Tried to change TTL, no change
Main router is a Vodafone station, I will try changing the TTL, don’t think it has Mac binding. Currently the network is shared by another wifi extender and works well.
I did try to wisp the hotspot from my phone and same results, ethernet shows unidentified network
@Dear z,
1. What is the brand and model of your existing Wi-Fi device?
2. You can try to customise the TTL of your Cudy to 64 when setting the WISP mode and check again.
3. Is it possible that your existing Wi-Fi device has the MAC binding function? If yes, you can disable it and try again.
hi, when in wisp mode after connected can’t get ethernet connection, but when in repeater mode yes. how so?
can i connect another router in wisp mode through ethernet to have cablet internet inside the house, how to configure?