Прежде чем создавать Mesh-сеть
1. Убедитесь, что есть по крайней мере два устройства Cudy.
2. Убедитесь, что все имеющиеся устройства Cudy поддерживают технологию Mesh.
3. Убедитесь, что на всех устройствах установлена последняя версия прошивки.
4. Убедитесь, что все устройства находятся в одной комнате (на время настройки).
5. Восстановите заводские настройки на всех устройствах Cudy.
6. Настройте основное Mesh-устройство и установите на нём подключение к интернету.
Инструкция по созданию Mesh-сети
В данном примере используются модели M1800 и WR2100:
Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Нажмите на знак плюса (+) в разделе «Состояние системы».
Шаг 3. Нажмите на кнопку WPS на корпусе устройства M1800, затем нажмите на кнопку WPS на корпусе устройства WR2100.
Индикатор на основном Mesh-модуле должен мигать белым. Индикатор на вспомогательном Mesh-модуле должен мигать красно-белым.
Шаг 4. Откроется окно Сканирование, затем окно Подключение.
Шаг 5. Дождитесь, когда индикатор на вспомогательном модуле будет непрерывно гореть синим, затем переместите WR2100 в нужное место.
Шаг 6. Mesh-сеть успешно создана!
Комментариев: 87
I have a set if m3000 v1 and a p4 v1. The p4 is the mai router as I live in an area where internet fluctuates and it’s good for mobile feature. The problem is i have these m3000 i cannot connect to the p4. It only works with the cable. Are they incompatible? I am unable to find this information. The thing is when I try to add from p4 app they are discovered, but fail on connecting. Firmware are up to date on all. I even reset all to factory. I am writing this as cable is not a good option fo me. Should I put one of the m3000 as main router?
Thanks.
@Dear Geoffrey,
Thank you for advice. We have plan to add this feature in the future.
“As per Drew’s comment, I would like to also like a device to be able to prefer a particular node on a mesh network. I think that this would be a useful feature. I have a situation (that I’m still looking into) where my mobile phone will only connect with my streamer if they are both using the same mesh node – not sure why at the moment.
Geoff”
As per Drew’s comment, I would like to also like a device to be able to prefer a particular node on a mesh network. I think that this would be a useful feature. I have a situation (that I’m still looking into) where my mobile phone will only connect with my streamer if they are both using the same mesh node – not sure why at the moment.
Geoff
@Dear Drew,
Thank you for your kindly advice. We will provide your feedback to the product department for evaluation.
“Please make it so you can set devices to prefer a particular node on the mesh network. I want to benefit from the WiFi 7 MLO on my laptop, but sometimes it will switch to the secondary node and I don’t get the same benefits. This should be an easy feature-add! Thank you! We also need more control over clients, especially on guest networks.”
Please make it so you can set devices to prefer a particular node on the mesh network. I want to benefit from the WiFi 7 MLO on my laptop, but sometimes it will switch to the secondary node and I don’t get the same benefits. This should be an easy feature-add! Thank you! We also need more control over clients, especially on guest networks.