Шаг 1. Введите в адресной строке браузера http://cudy.net или http://192.168.10.1.
Шаг 2. Перейдите в раздел Общие настройки 🡢 VPN и переведите переключатель Включить в подразделе VPN во включённое положение.
Чтобы включить (отключить) VPN для конкретных устройств, перейдите в раздел Состояние системы 🡢 Устройства и переведите переключатель VPN напротив нужного устройства в нужное положение.
Шаг 3. В выпадающем списке параметра Протокол выберите нужный протокол и настройте параметры согласно указаниям поставщика VPN-услуг.
PPTP
Введите адрес VPN-сервера (например, 113.92.73.163), а также имя пользователя и пароль, предоставленные поставщиком VPN-услуг.
L2TP
Введите адрес VPN-сервера (например, 113.92.73.163), а также имя пользователя, пароль и ключ PSK, предоставленные поставщиком VPN-услуг.
Если поставщик VPN-услуг также предоставляет IP-адрес для привязки учётной записи, активируйте параметр Использовать пользовательский IP-адрес туннеля.
OpenVPN
Нажмите на кнопку Обзор... и импортируйте файл настроек, полученный от поставщика VPN-услуг.
WireGuard
Нажмите на кнопку Обзор... и импортируйте файл настроек, полученный от поставщика VPN-услуг.
Поля подразделов Интерфейс и Одноранговый узел будут заполнены автоматически с помощью файла настроек (CONF) поставщика VPN-услуг.
ZeroTier
Введите нужные значения в поля Идентификатор сети ZeroTier и Шлюз.
Комментариев: 196
Yes, there is a huge difference. Wireguard is blocked in Russia (so it doesn’t work and nobody would use it) while AmneziaWG still works.
AmneziaWG adds obfuscation techniques, such as modifying packet headers and appending random data, to disguise its traffic as other UDP protocols and blend in with normal internet traffic. In essence, AmneziaWG maintains WireGuard’s performance and security but adds a layer of stealth, making it suitable for use in regions with strict internet censorship.
They are opensource – https://github.com/amnezia-vpn
ps: on keenetic devices (but I prefer Cudy anyway ;) there is even a possibility to connect by AmneziaWG using Wireguard option in Keenetic (instuction is only in russian though – https://docs.amnezia.org/documentation/instructions/keenetic-os-awg/)
In other words – almost nothing works here (in Russia) except Amnezia (based on WG) and Shadowsocks. But both of them are not available on TR3000 device yet :(
“@Dear Mike,
Is there any difference betweem AmneziaWG VPN and standard Wireguard VPN? Can you send us some introduction about AmneziaWG VPN?”
“I do support question about AmneziaWG VPN. Is there a possibility that you’ll add this protocol in future versions?”
@Dear Arturo,
OK. That is a good news.
“I add that from the lan2 network to the lan1 network the ping works regardless of the state of the site to site button”
I add that from the lan2 network to the lan1 network the ping works regardless of the state of the site to site button
Hi, I downloaded and installed the latest firmware found on your website (LT500E V1.0 hardware) 2.3.13-20250221-111145
I’ve already tried all the options, including the site-to-site option. It doesn’t change anything at all.
@Dear Arturo,
1. Please update the firmware of LT500 to the latest firmware version.
2. Please try to enable the site-to-site option.
Then check if the problem fixed?
“Good morning, I created LAN1 with an OpenVPN server on an OpenWrt router and LAN2 with a Cudy LT500 OpenVPN client router. The VPN (TUN) closes but I can’t ping LAN2 from LAN1. From within Cudy, I can ping devices on LAN1 and those addressed to the VPN network via the VPN interface, but from the Cudy LAN interface, however, I can’t. From LAN1, I can ping the server-side VPN interface but not the Cudy-side VPN interface or the Cudy-side LAN subnet. Basically, the VPN isn’t redirected to the Cudy LAN. I’ve tried every possible Cudy setting to no avail. It seems there’s a missing network connecting the VPN to the LAN. Do you have any suggestions? Is there any way to access it via SSH to manually add the missing routes? If so, how? Thanks.”