Modo WISP:
No modo WISP, o roteador permite que vários usuários compartilhem a conexão de internet do WISP. Os dispositivos da porta LAN compartilham o mesmo IP do WISP por meio da porta sem fio. Quando conectado ao WISP, a porta sem fio funciona como uma porta WAN.
Topologia de rede comum:
Passo 1: Abra um navegador da web e vá para http://cudy.net ou http://192.168.10.1.
Para mais detalhes, consulte Como fazer login na interface web do Cudy Router?
Passo 2: A janela Configuração rápida será exibida, escolha "WISP", então vá"Próximo".
Etapa 3: Escolha o seu "Fuso horário".
Passo 4: Selecione a rede host que deseja estender. Clique em 'Conectar'.
Ou clique em Configurações gerais->WISP->Habilitar e então selecione a rede host que você deseja estender.
Etapa 5: Digite a senha sem fio da rede host.
Observação: Certifique-se de que a senha da rede sem fio digitada esteja correta, caso contrário, a configuração não será bem-sucedida.
Etapa 6: Personalize o nome e a senha da rede sem fio ou mantenha-os como padrão.
Passo 7: Clique em "Salvar e aplicar" para concluir a configuração.
Passo 8: Aguarde alguns segundos para que o sistema reinicie. Quando a página de login aparecer novamente, você poderá aproveitar a internet.
110 comentários
Both Pavel and I encountered the same issue in WIPS mode, where the device fails to connect to most 5GHz Wi-Fi networks. I saw that support recommended using channels 36–48 (UNII-1). May I ask how to connect to channels 52–64 (UNII-2) and 100–144 (UNII-2 Extended)? Many 5GHz Wi-Fi networks in Hong Kong operate on the 100–144 range. I am using the TR1200 V1 with firmware version 2.4.15 CN.
WR3600H or add OpenWRT or finish the firmware with a working WISP? I got my hands on beta 2.3.11 which has WISP but there are a lot of bugs that are impossible to live with. Give me a real time frame for the release of a working firmware with WISP or WRT so that I can either return your router or wait for a working firmware.
@Dear TH,
TR3000 doesn’t support connecting to the PEAP Wi-Fi network currently. We will feed back this to Cudy R&D team to evaluate if we can support in future.
“I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?”
I have a Cudy TR3000 router and I am able to use WISP to connect to public WIFI. However, there are some public WIFI providers that require access via PEAP. The WISP interface does not provide a way for the username to be provided these public WIFI providers. Is Cudy TR3000 able to support WISP using PEAP? Is there a plan to roll it out soon in the future if it is not supported now?
@Dear Pavel,
I think it is related to the 5G WiFi channel. Please set the 5GHz channel of your existing WiFi to one of the 36-48, then check if the problem fixed?
“I have a problem setting up wisp mesh network – Cudy doesn’t see my 5G wifi network, only 2g. therefore the speed is low if I do mesh with WIPS 2g, I can’t find my 5g network, my laptop, phone etc see this network. Cudy – no. Pls help”