Topologia de rede comum:
Passo 1: Conecte o extensor de alcance na tomada de parede e espere até que a luz de energia fique acesa de forma estável.
Observação:
1. Ao configurar o extensor de alcance, coloque-o mais próximo do roteador host.
2. REINICIARo extensor de alcance para as configurações padrão para evitar interfaces.
Passo 2:Conecte-se ao Wi-Fi padrão do extensor de alcance, que é o Wi-Fi aberto.
Etapa 3: Abra um navegador da web e entrehttp://cudyre.net/ouhttp://192.168.10.254/na barra de endereço.
A página de login abaixo será exibida. Escolha o idioma de exibição da página de gerenciamento web e a senha solicitada é 'administrador' ou precisa criar uma senha.
Passo 4:A janela de configuração rápida será exibida, escolha 'Extensor sem fio, então vá 'Próximo'.
Etapa 5:Escolha o seu"Fuso horário".
Etapa 6:Selecione a rede host que você deseja estender. Clique em 'Conectar'.
Etapa 7:Digite a senha sem fio do roteador host.
Observação:Certifique-se de que a senha da rede sem fio digitada esteja correta, caso contrário, a configuração não será bem-sucedida.
Etapa 8:Personalize o nome do WiFi (SSID) e a senha para que seja a mesma da sua rede host.
Etapa 9:Clique'Salvar e aplicar'para concluir a configuração.
Passo 10:Reconecte seus dispositivos sem fio à nova rede Wi-Fi.
Observação:
Após a configuração, o endereço IP atribuído não será 192.168.10.254. Para acessar o Cudy Extender novamente, visite "http://cudyre.net" ou encontre o endereço IP na lista de clientes do roteador.
18 comentários
@Dear Greg,
Our technical support has sent you the solutions via email. Please check.
“My RE3000 worked well for almost two years. Then problem started. Not passing internet connection. WIFI signal stays ok, byt no internet. Power off/on was helping for some time. The process keep getting worse. Initially once a month, than once or twice a week.
Updates are automatic, the newest version is loaded.
When I reset everthing to factory settings and started from the beginning as stated here on the help pages, all looked ok.
The wifi , ssid, all works. works but no internet.
On the status page all stays green, looks great. However without forwarding any internet.
What else can I do?”
My RE3000 worked well for almost two years. Then problem started. Not passing internet connection. WIFI signal stays ok, byt no internet. Power off/on was helping for some time. The process keep getting worse. Initially once a month, than once or twice a week.
Updates are automatic, the newest version is loaded.
When I reset everthing to factory settings and started from the beginning as stated here on the help pages, all looked ok.
The wifi , ssid, all works. works but no internet.
On the status page all stays green, looks great. However without forwarding any internet.
What else can I do?
Bardzo dziękuję
I have AC1200 Cudy Extenders (3 pack) The master Extender is working but the other two which are positioned away from the Master and the Fritz Box Router have stopped working.
I have reset them to factory settings many times and tried to re pair them with the master by pressing the button on the back of the extender for 1 second and then pressing the button on the back of the Master Cudy for 1 second. The lights are flashing on both but the light on the Master returns to solid white/blue after about 2 minutes while the light on the extender changes to Solid Red, I also purchased a new extender but the same thing happens when I try to pair, therefore I don’t think the original 2 extenders are damaged but why will they not pair with the master.
i can not follow how to do this online, is there someone who can help me through the steps required?? Thank you.
@Dear Rue,
1. Please try to reset the Extender to factory default by long pressing the reset button for about 3 seconds. You can release the reset button when the LED flashes. Then reinstall the Extender and check if the problem remains？
2. You can try to update the latest firmware of your Extender and check again. You can download the firmware on the link.
https://www.cudy.com/en-us/pages/download-center/search
“My exteneder just flash light and then turns off and dose not show the word mange router as usual and when i link it to the router the lock light is the only bright light”