Topologia de rede comum:
Passo 1: Conecte o extensor de alcance na tomada de parede e espere até que a luz de energia fique acesa de forma estável.
Observação:
1. Ao configurar o extensor de alcance, coloque-o mais próximo do roteador host.
2. REINICIARo extensor de alcance para as configurações padrão para evitar interfaces.
Passo 2:Conecte-se ao Wi-Fi padrão do extensor de alcance, que é o Wi-Fi aberto.
Etapa 3: Abra um navegador da web e entrehttp://cudyre.net/ouhttp://192.168.10.254/na barra de endereço.
A página de login abaixo será exibida. Escolha o idioma de exibição da página de gerenciamento web e a senha solicitada é 'administrador' ou precisa criar uma senha.
Passo 4:A janela de configuração rápida será exibida, escolha 'Extensor sem fio, então vá 'Próximo'.
Etapa 5:Escolha o seu"Fuso horário".
Etapa 6:Selecione a rede host que você deseja estender. Clique em 'Conectar'.
Etapa 7:Digite a senha sem fio do roteador host.
Observação:Certifique-se de que a senha da rede sem fio digitada esteja correta, caso contrário, a configuração não será bem-sucedida.
Etapa 8:Personalize o nome do WiFi (SSID) e a senha para que seja a mesma da sua rede host.
Etapa 9:Clique'Salvar e aplicar'para concluir a configuração.
Passo 10:Reconecte seus dispositivos sem fio à nova rede Wi-Fi.
Observação:
Após a configuração, o endereço IP atribuído não será 192.168.10.254. Para acessar o Cudy Extender novamente, visite "http://cudyre.net" ou encontre o endereço IP na lista de clientes do roteador.
16 comentários
Hello, I have the AP1300 outdoors and I am using it as an extender. Although I set it up successfully and I can connect with very good speeds after a few hours all my devices are disconnected and cannot obtain IP. My router IP is 192.168.2.1. My provider tried to make some settings, even try a static ip with with range but again after a few hours all devices are disconnected. Is the repeater IP the same as my router’s? In the cudy app it notes that my IP is 192.168.10.254. My service provider says that this might be the problem. Please help me to solve this, when the devices works it really works great. Thank you in advance, George
@Claudia,
You can try to reset the device to factory default and set it up again. If the device is faulty, such as the LED will not power on. I suggest you to contact the seller to request a warranty.
“Hi
My extender just stopped working”
Hi
My extender just stopped working
@Dear Pernilla Staxered,
It is strange. What is the model and brand of the main WiFi device. I want to check it and try to test it. In addition, Please try to connect to the Range extender via cable, and login to the web page, go to “Generally Settings” -“Wireless” page to check the WiFi password. Is it correct.
If you can’t connect to the Range extender via cable, please reset it, then you can set it via the WEB page rather than the WPS button, Check if the problem fixed?
“Hello! We have bought a cudy extender and plugged it in by pressing wps on our router. The nerwork has full range and all the lights are on at the extender. However when we try to login at our iphone or television it says that we should use the same password as at the original router and it does not work. We have dubbelchecked many times. The name of the extender network is the same as the original network but ends with EXT5G or EXT2G.
It does not work with any of those two. Please help us.
Best regards, Pernilla”
@Dear mohammed widad,
The orange color means that the signal strength of the main WiFi at the location of the Cudy Range extender is not good. Is it possible to move closer to the main WiFi device to enhance the signal strength.
“I’ve finished all the configuration, but now I see the orange color in the wifi ?”