Avisos
Esta página lista softwares de dispositivos compatíveis com o sistema OpenWrt. Antes de baixar e instalar o software, observe que o Projeto OpenWrt é um sistema operacional Linux voltado para dispositivos embarcados. Em vez de tentar criar um firmware único e estático, o OpenWrt oferece um sistema de arquivos totalmente gravável com gerenciamento de pacotes. Isso o libera da seleção e configuração de aplicativos fornecidas pelo fornecedor e permite que você personalize o dispositivo por meio do uso de pacotes para se adequar a qualquer aplicação. Para desenvolvedores, o OpenWrt é a estrutura para construir um aplicativo sem a necessidade de construir um firmware completo em torno dele; para usuários, isso significa a capacidade de personalização completa, para usar o dispositivo de maneiras nunca antes imaginadas.
Descrição
- Este arquivo só pode ser usado quando o seu roteador funciona na interface web do Cudy.
- Se o roteador já estiver funcionando com a interface OpenWRT, o usuário deverá restaurá-lo para o firmware oficial da Cudy primeiro. Em seguida, atualizar o roteador com este firmware.
- Como restaurar o roteador para o firmware oficial da Cudy? Leia o arquivo leia-me no arquivo baixado.
Garantia:
Cudy declara por meio deste
- Nós, da Cudy, não oferecemos garantia para nenhum software que não seja lançado pela Shenzhen Cudy Technology Co., Ltd.
- Não assumimos nenhuma garantia para produtos que tenham instalado qualquer software não lançado pela Shenzhen Cudy Technology Co., Ltd.
- Se você precisar usar o software openwrt, sugerimos que você o baixe do site oficial da Cudy.
Baixe o firmware OpenWrt para remover a verificação de assinatura:Dirigir
Localizador de firmware OpenWrt (não lançado pela Cudy):Seletor de Firmware OpenWrt
1530 comentários
Dear Cudy Support Team,
I would like to install OpenWrt on my router and need the correct, current Cudy-signed intermediate firmware.
Model: Cudy WR3000H V1.0
Serial number: s0001004261805726
Current stock firmware: 2.5.30-20260825-161645
I tried the intermediate file cudy_wr3000h-v1-sysupgrade_20251119.bin from the Google Drive folder. The stock web UI rejects it with the error “File is not compatible with the device model(s).”
Could you please send me the correct intermediate firmware and recovery firmware for my hardware variant and firmware version? If my unit needs a different image (for example, because of the newer flash chip or WAN PHY variants), please let me know which one.
I prefer communication over email.
Thank you.
Email: ankrumov@proton.me
Hello Cudy Support,
I have the same router model and production batch as Farid, who posted here on October 13, 2026.
My device details:
- Model: Cudy TR3000-256MB
- Hardware revision: EAEU 1.0
- Production week: 2623
- Current stock firmware: 2.5.27 RU
- Flash memory: 256 MB
I would like to install official OpenWrt on my router.
I downloaded the publicly available intermediate firmware (cudy_tr3000-256mb-v1-sysupgrade.bin), but it appears to be an older May 2025 build. I have NOT flashed it, as I understand that newer production batches may use the F50L1G41LC NAND flash chip.
Since Farid received an updated intermediate firmware from your technical support on October 14, could you please provide the same compatible firmware for my device?
I would also appreciate:
1. The latest Cudy-signed OpenWrt intermediate firmware compatible with production batch 2623 and stock firmware 2.5.27 RU.
2. The correct TFTP recovery firmware (recovery.bin) for my hardware revision.
3. Confirmation that the official OpenWrt 25.12.x sysupgrade image for TR3000-256MB V1 can be installed afterward.
I would prefer to confirm compatibility before flashing to avoid bricking my router.
Thank you very much for your help!
Dear Cudy Support,
Thank you. I received the firmware.
Please confirm one specific point:
Is the attached cudy_tr3000-256mb-v1-sysupgrade.bin with SHA-256
702d8a0019f50d81565bf2b7d0eecd1ca4e1720937b1f8340bd4be77c79a2552
confirmed safe for TR3000-256MB EAEU1.0, production week 2623, with F50L1G41LC NAND?
Please answer yes or no.
I also requested the matching recovery firmware, but it was not included. Please send it as well.
Best regards,
Farid
@Dear Farid,
Our technical support has sent you the firmware via email. Please check.
“TR3000-256MB EAEU1.0, production week 2623, stock firmware 2.4.21-20251009-115734.
Please send me the updated Cudy-signed OpenWrt intermediate firmware compatible with the newer F50L1G41LC NAND and the matching recovery firmware.
The public Google Drive currently contains only the old May 21, 2025 intermediate.”
TR3000-256MB EAEU1.0, production week 2623, stock firmware 2.4.21-20251009-115734.
Please send me the updated Cudy-signed OpenWrt intermediate firmware compatible with the newer F50L1G41LC NAND and the matching recovery firmware.
The public Google Drive currently contains only the old May 21, 2025 intermediate.