Avisos
Esta página lista softwares de dispositivos compatíveis com o sistema OpenWrt. Antes de baixar e instalar o software, observe que o Projeto OpenWrt é um sistema operacional Linux voltado para dispositivos embarcados. Em vez de tentar criar um firmware único e estático, o OpenWrt oferece um sistema de arquivos totalmente gravável com gerenciamento de pacotes. Isso o libera da seleção e configuração de aplicativos fornecidas pelo fornecedor e permite que você personalize o dispositivo por meio do uso de pacotes para se adequar a qualquer aplicação. Para desenvolvedores, o OpenWrt é a estrutura para construir um aplicativo sem a necessidade de construir um firmware completo em torno dele; para usuários, isso significa a capacidade de personalização completa, para usar o dispositivo de maneiras nunca antes imaginadas.
Descrição
- Este arquivo só pode ser usado quando o seu roteador funciona na interface web do Cudy.
- Se o roteador já estiver funcionando com a interface OpenWRT, o usuário deverá restaurá-lo para o firmware oficial da Cudy primeiro. Em seguida, atualizar o roteador com este firmware.
- Como restaurar o roteador para o firmware oficial da Cudy? Leia o arquivo leia-me no arquivo baixado.
Garantia:
Cudy declara por meio deste
- Nós, da Cudy, não oferecemos garantia para nenhum software que não seja lançado pela Shenzhen Cudy Technology Co., Ltd.
- Não assumimos nenhuma garantia para produtos que tenham instalado qualquer software não lançado pela Shenzhen Cudy Technology Co., Ltd.
- Se você precisar usar o software openwrt, sugerimos que você o baixe do site oficial da Cudy.
Baixe o firmware OpenWrt para remover a verificação de assinatura:Dirigir
Localizador de firmware OpenWrt (não lançado pela Cudy):Seletor de Firmware OpenWrt
1530 comentários
@Dear Yaroslav,
Our technical support has sent you the firmware via email. Please check.
“@Dear support, I have a Cudy TR3000. Stock firmware 2.5.27-20260804-183625, SN: TR3000254500619. Please send me the correct Cudy-signed intermediate firmware”
@Dear support, I have a Cudy TR3000. Stock firmware 2.5.27-20260804-183625, SN: TR3000254500619. Please send me the correct Cudy-signed intermediate firmware
@Dear Vitaliy,
Our technical support has sent you the firmware via email. Please check.
“Hello.
I have a Cudy TR3000-256MB (hardware TR3000 256MB FLASH V1.0, label revision EAEU1.0), SN: S0001302262309298, stock firmware 2.5.27-20260804-190139.
I would like to install OpenWrt. Based on the serial number, I believe this unit has the new F50L1G41LC flash. Please send me:
(1) the correct Cudy-signed intermediate firmware for this exact unit, and confirm it supports the new flash;
(2) the official stock firmware for TR3000 256MB (R103) and instructions to restore it from OpenWrt;
(3) written confirmation of the warranty terms after installing OpenWrt.
Thank you."
Hello.
I have a Cudy TR3000-256MB (hardware TR3000 256MB FLASH V1.0, label revision EAEU1.0), SN: S0001302262309298, stock firmware 2.5.27-20260804-190139.
I would like to install OpenWrt. Based on the serial number, I believe this unit has the new F50L1G41LC flash. Please send me:
(1) the correct Cudy-signed intermediate firmware for this exact unit, and confirm it supports the new flash;
(2) the official stock firmware for TR3000 256MB (R103) and instructions to restore it from OpenWrt;
(3) written confirmation of the warranty terms after installing OpenWrt.
Thank you.
@Dear Arham,
There is no OpenWrt firmware for RE1200 currently. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
“Subject: Request: OpenWrt intermediate firmware for RE1200 V1.0 (same as RE1200 Outdoor)
Hello,
I’d like to install OpenWrt on my Cudy RE1200 V1.0 (current firmware: RE1200-R14-2.4.20-20250908-170954).
I understand that for the RE1200 Outdoor, Cudy provides a signed “intermediate firmware” that removes the bootloader’s firmware signature/image-name check, after which standard OpenWrt builds can be installed. Could you provide the equivalent intermediate firmware for the RE1200 V1.0 (board/image name “R14”)?
I previously contacted support about this and was told no OpenWrt firmware exists yet for the RE1200 V1.0, so no intermediate firmware is offered. Since the RE1200 V1.0 uses the same MT7628-based hardware and the same U-Boot signature-check mechanism as the RE1200 Outdoor (just a different board/image name, “R14” vs “R56”), I wanted to ask directly whether an R14-specific intermediate firmware could be built, the same way it was for the Outdoor.
If it would help, I’m happy to provide my current firmware version, board revision, or any other details needed.
Thank you for your time.
Arham"