Download do software OpenWrt

Avisos

Esta página lista softwares de dispositivos compatíveis com o sistema OpenWrt. Antes de baixar e instalar o software, observe que o Projeto OpenWrt é um sistema operacional Linux voltado para dispositivos embarcados. Em vez de tentar criar um firmware único e estático, o OpenWrt oferece um sistema de arquivos totalmente gravável com gerenciamento de pacotes. Isso o libera da seleção e configuração de aplicativos fornecidas pelo fornecedor e permite que você personalize o dispositivo por meio do uso de pacotes para se adequar a qualquer aplicação. Para desenvolvedores, o OpenWrt é a estrutura para construir um aplicativo sem a necessidade de construir um firmware completo em torno dele; para usuários, isso significa a capacidade de personalização completa, para usar o dispositivo de maneiras nunca antes imaginadas.

Descrição

  1. Este arquivo só pode ser usado quando o seu roteador funciona na interface web do Cudy.
  2. Se o roteador já estiver funcionando com a interface OpenWRT, o usuário deverá restaurá-lo para o firmware oficial da Cudy primeiro. Em seguida, atualizar o roteador com este firmware.
  3. Como restaurar o roteador para o firmware oficial da Cudy? Leia o arquivo leia-me no arquivo baixado.

Garantia:

Cudy declara por meio deste

  1. Nós, da Cudy, não oferecemos garantia para nenhum software que não seja lançado pela Shenzhen Cudy Technology Co., Ltd.
  2. Não assumimos nenhuma garantia para produtos que tenham instalado qualquer software não lançado pela Shenzhen Cudy Technology Co., Ltd.
  3. Se você precisar usar o software openwrt, sugerimos que você o baixe do site oficial da Cudy.

Baixe o firmware OpenWrt para remover a verificação de assinatura:Dirigir

Localizador de firmware OpenWrt (não lançado pela Cudy):Seletor de Firmware OpenWrt 

Voltar para o blog

1531 comentários

@Dear Марченков Алексей Иванович,
Our technical support has sent you the firmware via email. Please check.

“Hello,

I have a Cudy WR3000 v1.0 router.

Serial number starts with: 2553

Current stock firmware: 2.4.19-20250828-192837

Please send me the updated Cudy-signed OpenWrt intermediate firmware compatible with the new F50L1G41LC flash chip. I need it to install the official OpenWrt firmware.

Thank you."

support

Hello,

I have a Cudy WR3000 v1.0 router.

Serial number starts with: 2553

Current stock firmware: 2.4.19-20250828-192837

Please send me the updated Cudy-signed OpenWrt intermediate firmware compatible with the new F50L1G41LC flash chip. I need it to install the official OpenWrt firmware.

Thank you.

Марченков Алексей Иванович

@Dear Peter,
1. Did you unzip the file to a “bin” file when update? If not, please unzip the file.
2. Do you install mesh system with the WR3000S? If yes, please reset the router to factory default and power off other satellite mesh device. Then update this firmware.

“I have tried to restore the cudy_wr3000s_v1* file to my new WR3000S router. The message: File is invalid. Please retry. appears. Can you send me a file that works properly. This process worked well for my first WR3000S but not now. The new serial number is: S0007085261105145 Thank you.”

support

Got the WR3000S working. Here’s how: I tried flashing the upstream openwrt sysupgrade, and it was rejected, then retried the gdrive hosted one and it accepted it. The file with 403e276f74fd29917fd4260294d1a137

Don B

Also receiving “File is invalid” using the latest WR3000S file on the google drive that has the md5sum 403e276f74fd29917fd4260294d1a137.

Don B

Deixe um comentário