Avisos
Esta página lista softwares de dispositivos compatíveis com o sistema OpenWrt. Antes de baixar e instalar o software, observe que o Projeto OpenWrt é um sistema operacional Linux voltado para dispositivos embarcados. Em vez de tentar criar um firmware único e estático, o OpenWrt oferece um sistema de arquivos totalmente gravável com gerenciamento de pacotes. Isso o libera da seleção e configuração de aplicativos fornecidas pelo fornecedor e permite que você personalize o dispositivo por meio do uso de pacotes para se adequar a qualquer aplicação. Para desenvolvedores, o OpenWrt é a estrutura para construir um aplicativo sem a necessidade de construir um firmware completo em torno dele; para usuários, isso significa a capacidade de personalização completa, para usar o dispositivo de maneiras nunca antes imaginadas.
Descrição
- Este arquivo só pode ser usado quando o seu roteador funciona na interface web do Cudy.
- Se o roteador já estiver funcionando com a interface OpenWRT, o usuário deverá restaurá-lo para o firmware oficial da Cudy primeiro. Em seguida, atualizar o roteador com este firmware.
- Como restaurar o roteador para o firmware oficial da Cudy? Leia o arquivo leia-me no arquivo baixado.
Garantia:
Cudy declara por meio deste
- Nós, da Cudy, não oferecemos garantia para nenhum software que não seja lançado pela Shenzhen Cudy Technology Co., Ltd.
- Não assumimos nenhuma garantia para produtos que tenham instalado qualquer software não lançado pela Shenzhen Cudy Technology Co., Ltd.
- Se você precisar usar o software openwrt, sugerimos que você o baixe do site oficial da Cudy.
Baixe o firmware OpenWrt para remover a verificação de assinatura:Dirigir
Localizador de firmware OpenWrt (não lançado pela Cudy):Seletor de Firmware OpenWrt
1466 comentários
Hi, I have a Cudy WR3000 EU 1.0 router with serial number starting with 2451 running firmware 2.2.6 US. I would like to install OpenWRT. Can you provide me the intermediate firmware for my device?
By the way, is there any reason not to have it available in the Google Drive folder along with the other models?
@Dear Christian Boettger,
For now, no, we can’t do this job currently.
“Hello,
is there any chance that Cudy will release an OpenWRT firmware for the WR3000 v2.0 (there is one für 1.0, but nor 2.0)?
Regards"
Hello,
is there any chance that Cudy will release an OpenWRT firmware for the WR3000 v2.0 (there is one für 1.0, but nor 2.0)?
Regards
Dear Sergey,
I am not sure about this. Please have a try.
“Hello. I have a WR3000S v.1 router (S/N S0007084261201121). I initially installed the transitional firmware `cudy_wr3000s-v1-sysupgrade_20251119.bin` from your website. Currently, I have `openwrt-25.12.5-mediatek-filogic-cudy_wr3000s-v1-squashfs-sysupgrade.bin` installed, with 44 MB of available flash memory. Can I switch to the `openwrt-25.12.5-mediatek-filogic-cudy_wr3000s-v1-ubootmod-squashfs-sysupgrade.itb` firmware to get 90+ MB of memory without risking damage to the router?
Thanks in advance.”
@Dear bulat,
Our technical support has sent you the firmware via email. Please check.
“Hello Cudy Support,
I have a Cudy WR3000H V1.0.
Serial number: S001004261804085 EU1.0
Current stock firmware: 2.4.5-20250515-105059
I would like to install official OpenWrt. Please send me the latest Cudy-signed OpenWrt intermediate firmware compatible with my WR3000H V1.0.
Thank you!"