1. Baixe e descompacte o arquivo deaqui.
2. Baixe o firmware mais recente dosite oficiale renomeie-o para 'recovery.bin'.Nota: Você deve colocá-lo no mesmo arquivo das ferramentas do Tftpd.
3. Desligue o roteador. Desconecte o adaptador de energia ou pressione o botão POWER.
4. Conecte seu computador à porta LAN do roteador com um cabo Ethernet.
5. Configure manualmente o endereço IP do seu computador como '192.168.1.88'.
6. Corra 'tftp32.exe'.
7. Corra 'netsh advfirewall desativa o estado de todos os perfis' na linha de comando para desabilitar o firewall do Windows, caso contrário, o tftp será bloqueado. Ou você pode desabilitar o firewall no Painel de Controle do seu computador. Como mostrado abaixo.
8. Pressione o botão 'Reiniciar' botão/orifício e segure-o. Antes de ligar o roteador e antes que o tftp comece a baixar o firmware, não solte o botão 'Reiniciar' botão/buraco.
9. Ligue o roteador.
10. Quando todas as luzes estiverem piscando rapidamente, ou quando o tftp começar a baixar o firmware, você pode soltar o 'Reiniciar' botão/buraco.
11. Quando a luz piscar lentamente, a atualização estará concluída.
12. Recupere o endereço IP do seu computador para um IP dinâmico.
13. Pronto.
230 comentários
您好，我的TR3000在刷入過渡韌體後再刷入KWRT後就連不上，疑似是檔案過大。後來用tftp刷回時有出現download且紅白燈交替慢閃，持續約五分鐘後還是一樣，改回DHCP也是無法連接。
@Nitin,
Dear Customer,
Thank you for contacting Cudy support team.
Sorry to tell you, we don’t have proper method to this issue. I suggest you to buy a new router.
“Hello
For Cudy X6 V2, I am having the same issue – invalid board info.
It doesnot allow any login or setup(effectively bricking the router).
Can you please outline the steps to recover from this situation.
Thank you”
Hello
For Cudy X6 V2, I am having the same issue – invalid board info.
It doesnot allow any login or setup(effectively bricking the router).
Can you please outline the steps to recover from this situation.
Thank you
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.
“Greetings, I possess a Cudy X6 V2 router operating on OpenWrt, and I wish to revert to the official Cudy firmware. I followed your instructions to return to Cudy’s firmware, i.e. to go from OpenWRT Firmware back to Cudy’s Official Firmware. After i flashed successfully with tftp32 the newest official firmware for the cudy x6 v2 (x6v2-R30-2.1.0-20240411-114110), I get “invalid board info” error at the device login page (192.168.10.1 or cudy.net) where one needs to create a new admin password. The website-header also reads a strange “lede” title. What does the “Invalid board info!” error mean and how can it be fixed? kind regards!”
Greetings, I possess a Cudy X6 V2 router operating on OpenWrt, and I wish to revert to the official Cudy firmware. I followed your instructions to return to Cudy’s firmware, i.e. to go from OpenWRT Firmware back to Cudy’s Official Firmware. After i flashed successfully with tftp32 the newest official firmware for the cudy x6 v2 (x6v2-R30-2.1.0-20240411-114110), I get “invalid board info” error at the device login page (192.168.10.1 or cudy.net) where one needs to create a new admin password. The website-header also reads a strange “lede” title. What does the “Invalid board info!” error mean and how can it be fixed? kind regards!