O que é o Modo de Ponto de Acesso?
O modo de ponto de acesso é quando o roteador usa uma conexão com fio ao roteador principal ou roteador modem para expandir a cobertura sem fio de uma rede doméstica.
Topologia de rede comum:
Passo 1:Abra um navegador da web e vá parahttp://cudy.netouhttp://192.168.10.1.
Para mais detalhes, consulteComo fazer login na interface web do Cudy Router?
Passo 2:A janela Configuração rápida será exibida, escolha 'Ponto de acesso sem fio, então clique em 'Próximo'.
Etapa 3:Escolha o seu 'Fuso horário'.
Passo 4:Confirme a conexão do hardware.
Etapa 5:Altere o nome e a senha da rede sem fio.
Etapa 6:Clique em "Salvar e aplicar" para concluir a configuração.
Passo 7:Aguarde alguns segundos para que o sistema reinicie. Quando a página de login aparecer novamente, você poderá aproveitar a internet.
Observação:
Após configurar o roteador Cudy no modo Ponto de Acesso, o endereço IP será atribuído pelo roteador host e o endereço IP padrão 192.168.10.1 não permitirá o login. Se precisar fazer login no roteador Cudy novamente, digite 'http://cudy.net'no seu navegador ou procure o endereço IP do roteador Cudy na lista de clientes do seu roteador principal (primário).
67 comentários
@Steve,
Dear Customer,
Thank you for contacting Cudy support team. Please follow the steps:
1. Set the LAN IP address to the same subnet of the main router, it will be easy to login to the web page.
2. Set the WiFi SSID and password as you want.
3. Disable the DHCP server of the P5.
Then you can connect to the main router and use it as a AP.
“I have configured my P5 router, now I’d like to change it to Access Point. I can not see in the web interface any references at all to operation mode. How do I change the operation mode from wireless router to Access Point router?”
@Rafal,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has sent you the solutions via email. Please check.
“Hi. I have an LT500 router upstairs with sim card and another downstairs connected in AP mode via ethernet cable to the 1st one due there is very little wifi signal coming between floors through the ceiling. It works well but results in 2 different wifi networks upstairs and downstairs. So when moving between rooms devices not always switch to the network with better signal. How to make it one network with same login and password on both floors? Is it possible to configure a mesh in this situation?”
I have configured my P5 router, now I’d like to change it to Access Point. I can not see in the web interface any references at all to operation mode. How do I change the operation mode from wireless router to Access Point router?
Hi. I have an LT500 router upstairs with sim card and another downstairs connected in AP mode via ethernet cable to the 1st one due there is very little wifi signal coming between floors through the ceiling. It works well but results in 2 different wifi networks upstairs and downstairs. So when moving between rooms devices not always switch to the network with better signal. How to make it one network with same login and password on both floors? Is it possible to configure a mesh in this situation?
@Karol,
Dear Customer,
Yes, of course you can add another router before the Wr3000.
“Hi, and in the situation below, can there be another router before the Wr3000? I mean, can there be another router connected to the WAN, then connected to the wr3000?”