Outdoor AC1200 Gigabit Wireless Access Point, Model: AP1300 Outdoor
-
Speedy Dual-Band AC1200 Wi-Fi
With MU-MIMO and dual-band features, the AC1200 Wi-Fi AP can connect to over 30 devices while minimizing latency. The maximum number of simultaneous connections per AP is 128 devices.
Boosted Wi-Fi Coverage with Beamforming
Tested Wi-Fi coverage performance in four scenarios, achieved by Beamforming technology and two external antennas. If your space is too large for one access point to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP.
Plug-and-Play Mesh Installation
Simply Plug and Unplug for Mesh Setup
Connect the PoE adapter LAN port to a Cudy Mesh AP/router/Mesh unit/VPN Router/AC to add the new AP to the Mesh network. Feel free to unplug it or keep using Ethernet backhaul after pairing. (Requires firmware newer than 1.15.28, the other Cudy Mesh device needs to be purchased separately)
Leave the Rest to Adaptive Routing
Adaptive Routing improves the system's awareness of the capacity used by each node. Once the backhaul path is jammed by clients or interfered with by environmental factors, it will automatically switch to a better path for improved stability.
Guide to Wiring and Physical Installation
Gigabit Port with Two PoE Options
Supports two powering methods—
● 802.3at/af PoE (Max power: 11 W, Idle: 7.5 W)
● 24-57 V Passive PoE (Adapter included, not waterproof)
If you need to simplify the wiring, we recommend using a PoE Switch that powers multiple devices simultaneously. See Cudy PoE Switches for more information.Mounting Kit Included
A mounting kit is included in the box, supporting—
● Wall-Mounting
● Pole-MountingSpecifications
Hardware Features Highlights CPU: 880 MHz Dual-Core Processor Flash: 16 MB (128 Mbit) DDR: 128 MB (1 Gbit) Interface 1× Gigabit Ethernet (RJ-45) Port (Support IEEE802.3af PoE and Passive PoE) 1× Reset Button Power Supply 802.3af/at PoE 24-57 V Passive PoE (+4,5pins; -7,8pins) Dimensions ( W×D×H ) 240×100×53.7mm Antenna Type 2× Detachable Omni-directional Antennas
Mounting Pole/Wall Mounting (Kits included) Wireless Function Wireless Standard: Wi-Fi 5 (802.11ac/n/g/b/a)
Frequency: 5 GHz, 2.4 GHz Signal Rate: 5 GHz: Up to 867 Mbps 2.4 GHz: Up to 300 Mbps Bandwidth 20/40/80 MHz Wireless Functions
(Features with * require a Cudy AC as the gateway. Cudy AC is coming soon)
(Features with ** require a Cudy WR1300/WR3000 or Cudy AC as the gateway)
Multiple SSID * Captive Portal ** Seamless Roaming Mesh Self-Organizing Mesh Band Steering * Auto Channel Optimization* Enable/Disable Wireless Radio Transmit Power Control QoS (WMM) MU-MIMO Beamforming Rate Limit Reboot Schedule Wireless Schedule Wireless Encryption WPA-PSK WPA2-PSK WPA-PSK/WPA2-PSK Security Access Control Mac Filtering Wireless Isolation Clients Weather-Proof Dust/Water-Proof IP65 (Protection against any dust and low-pressure water from any directions) Lightning Protection 4 KV Lightning/Surge protection at the Ethernet port
ESD 8 KV Contact / 15 KV Air ESD protection Working Temperatures -20/60°C
Extend -40/65°C (Booted up in advance. Performance may drop slightly.)
Operating Mode Access Point Wi-Fi Router Range Extender WISP Mesh Package Content Outdoor Wireless Access Point 2× Detahcable Wi-Fi Antennas 48 V / 0.3 A Passive PoE Adapter Mounting Kits Installation Guide Environment Operating Temperatures: -20~60 °C (-4~140°F) ext. -40~65 °C (-40~149°F) Storage Temperature: -40–70 °C (-40–158 °F) Operating Humidity: 10–90% RH non-condensing Storage Humidity: 5–90% RH non-condensing System Requirements Operating system that supports network/Wi-Fi connectivity, such as Windows, Android, macOS, iOS, or Linux
-
-
● MT7621DAT+MT7613B+MT7603E
● 4-In-1: AP/RE/Router/WISP
● 1× Gigabit WAN/LAN
● WPS Button, Reset Button
● 802.3at/af PoE or Passive PoE (Adapter Included)
● Cudy Mesh
● IP65, -20~60°C (Ext. -40~65 °C), 8/15 KV Contact/Air ESD + 4 KV Surge/Lightning Protection
