WISP režīms:
WISP režīmā maršrutētājs ļauj vairākiem lietotājiem koplietot WISP interneta savienojumu. Šādā veidā LAN pieslēgvietas ierīces koplieto vienu un to pašu IP no WISP, izmantojot bezvadu pieslēgvietu. Kad bezvadu ports ir savienots ar WISP, tas darbojas kā WAN ports.
Bieža tīkla topoloģija:
1.solis: Atveriet tīmekļa pārlūkprogrammu un dodieties uz http://cudy.net vai http://192.168.10.1.
Sīkāku informāciju skatīt Kā pieteikties Cudy maršrutētāja tīmekļa saskarnē?
2. solis: Atvērsies ātrās iestatīšanas logs, izvēlieties "WISP", pēc tam dodieties uz "Nākamais".
3. solis: Izvēlieties savu "Laika joslu".
4. solis: Izvēlieties saimniekdatora tīklu, kuru vēlaties paplašināt. Noklikšķiniet uz "Pieslēgt".
Vai noklikšķiniet uz Vispārējie iestatījumi->WISP->Atļaut un pēc tam izvēlieties saimniekdatoru tīklu, kuru vēlaties paplašināt.
5. solis: Iesniedziet uzņēmēja tīkla bezvadu paroli.
Piezīme: Pārliecinieties, ka ievadītā bezvadu tīkla parole ir pareiza, pretējā gadījumā konfigurācija nevar izdoties.
6. solis: Pielāgojiet bezvadu tīkla nosaukumu un paroli vai saglabājiet tos pēc noklusējuma.
7. solis: Spiediet "Save &; Apply", lai pabeigtu konfigurāciju.
8. posms: No sistēmas pārstartēšanas pagaidiet dažas sekundes, kad atkal parādīsies pieteikšanās lapa, un varat baudīt internetu.
114 comments
I recently purchased the Cudy WR6500 as an upgrade to my older Cudy WR3000. My original plan was to use the new WR6500 as my main router and repurpose the WR3000 as a Mesh node to extend my network coverage.
However, I ran into a major issue: the WISP mode is missing in the WR6500 settings, whereas it works perfectly fine on the older WR3000.
Because the WR6500 lacks WISP support, I am currently forced to use it only as a Mesh extension instead of the main router, which completely degrades its performance and defeats the purpose of the upgrade.
Could the support team or anyone here provide me with a firmware version for the WR6500 that includes the WISP functionality?
I have the 4GvLTE N300 V3.0
I’ve got firmware 2.5.12 installed, but still no WISP
Could you send me the firmware that allows for Wisp please. I’m happy to test it if it’s Beta.
Hi, can I use the wr1200 to feed wired internet into my lan from a starlink mini wifi router. I would like to not have a wire from the starlink into my existing lan which covers 4 floors of a concrete building. Is this compatible.
Thank you.
@Dear Paulo Ruben Brás Ferreira,
Yes, the AX1500 models will support WISP function if you update it to the latest firmware version. You can download the firmware via the link below.
https://www.cudy.com/pages/download-center/search
“Dear Cudy Support!
Is there any version of the firmware, that supports WISP on AX1500 router?
Thank you and Best regards!”
@Dear Andrej Boyadjiev,
Our technical support has sent you the firmware via email. Please check.
“I cannot see the option for WISP. My router is just bought with SN: WR3600_EU V1.0. As I understand you can send me a firmware update with it. Thank you!”