1. Atsisiųskite naujausią programinę įrangą iš Siuntimų centro.
2. Išpakuokite atsisiųstą failą
3. Įjunkite Cudy įrenginį, palaukite, kol šviesos diodas pradės šviesti.
4. Prisijunkite prie Cudy tinklo per "WiFi" arba "Ethernet".
5. Atidarykite interneto naršyklę ir eikite į http://cudy.net arba http://192.168.10.1.
Išsamesnės informacijos rasite Kaip prisijungti prie "Cudy Router" žiniatinklio sąsajos?"
6. Atnaujinkite programinę įrangą.
a. Išplėstiniai nustatymai -> Įterptinė programinė įranga, pasirinkite išpakuotą programinę įrangą, kurią norite įkelti.
b. Bendrieji nustatymai->Programinė įranga puslapyje galima atlikti internetinį atnaujinimą ir vietinį atnaujinimą.
Pastaba: Palaikoma tik 2.x.x arba naujesnė programinė įranga.
7. Palaukite 5 minutes, kol maršrutizatorius bus paleistas iš naujo.
187 comments
The edge device is a Huawei GPON terminal configured in bridge mode and the model is NP2035G.
@Dear Steve,
I mean the terminal that is connected to the P5.
“This is a cudy P5 router version 1.0.”
This is a cudy P5 router version 1.0.
@Dear Steve,
It is possible. But there is no other feedback about this issue. May be a compatible issue with specific terminal. We will try to test it. What is the brand and model of the terminal?
“Hi support team,
I confirm that past thursday I replaced the power adapter with a 12V 4A one, updated the firmware to version 2.4.25, and re-enabled 802.11ax on the Cudy P5 router. Interestingly, I noticed that today, after being active for 17 hours, the router restarted after having been up and running for 7 days the wifi config 802.11ac on 5Ghz band without any issues.
Therefore, I reconfigured 802.11ac on the 5GHz band and 802.11n on the 2.4GHz band on the Cudy router to see how the service behaves.
My question is, could this be related to a bug with 802.11ax on 5Ghz band?"
Hi support team,
I confirm that past thursday I replaced the power adapter with a 12V 4A one, updated the firmware to version 2.4.25, and re-enabled 802.11ax on the Cudy P5 router. Interestingly, I noticed that today, after being active for 17 hours, the router restarted after having been up and running for 7 days the wifi config 802.11ac on 5Ghz band without any issues.
Therefore, I reconfigured 802.11ac on the 5GHz band and 802.11n on the 2.4GHz band on the Cudy router to see how the service behaves.
My question is, could this be related to a bug with 802.11ax on 5Ghz band?