1. ファイルをダウンロードして解凍しますここ。

2. 最新のファームウェアをダウンロードします。公式サイト名前を「recovery.bin」に変更します。注意: Tftpd ツールと同じファイルに配置する必要があります。

3. ルーターの電源を切ります。電源アダプターを抜くか, 電源ボタンを押します。
4. イーサネット ケーブルを使用してコンピューターをルーターの LAN ポートに接続します。
5. コンピュータの IP アドレスを手動で「192.168.1.88」に設定します。

6. 実行 'tftp32.exe'。
7. 実行 'netsh advfirewall すべてのプロファイルの状態をオフに設定コマンドラインで「」と入力してWindowsファイアウォールを無効にしてください。そうしないと, TFTPがブロックされます。または, コンピューターのコントロールパネルでファイアウォールを無効にすることもできます。以下の手順に従ってください。

8.「リセット' ボタン/穴を押したままにします。ルーターの電源を入れ, TFTP がファームウェアのダウンロードを開始する前に, ' ボタン/穴を押したままにしないでください。リセット' ボタン/ホール。
9. ルーターの電源を入れます。
10. ライトがすべて速く点滅しているとき, またはtftpがファームウェアのダウンロードを開始したときに, 「リセット' ボタン/ホール。

11. ライトがゆっくり点滅したら, アップグレードは完了です。
12. コンピュータの IP アドレスを動的 IP に戻してください。
13. 完了です。
226件のコメント
Greetings, I possess a Cudy X6 V2 router operating on OpenWrt, and I wish to revert to the official Cudy firmware. I followed your instructions to return to Cudy’s firmware, i.e. to go from OpenWRT Firmware back to Cudy’s Official Firmware. After i flashed successfully with tftp32 the newest official firmware for the cudy x6 v2 (x6v2-R30-2.1.0-20240411-114110), I get “invalid board info” error at the device login page (192.168.10.1 or cudy.net) where one needs to create a new admin password. The website-header also reads a strange “lede” title. What does the “Invalid board info!” error mean and how can it be fixed? kind regards!
@Ahmad,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.
“Please, contact me. I did all the steps and was unable to repair my Cudy wr1300. It’s seems that the firmware was successfully installed on the router but this did not change anything. I still have not gotten an IP address”
Please, contact me. I did all the steps and was unable to repair my Cudy wr1300. It’s seems that the firmware was successfully installed on the router but this did not change anything. I still have not gotten an IP address
Hi. Unfortunately, I didn’t find any email.
@Ahmad,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.
“Hi, why I couldn’t download any files? got 404”