アクセスポイントモードとは何ですか?
アクセス ポイント モードでは, ルータはプライマリ ルータまたはモデム ルータへの有線接続を使用して, ホーム ネットワークのワイヤレス カバレッジを拡張します。
一般的なネットワークトポロジ:
ステップ1:ウェブブラウザを開いてhttp://cudy.netまたはhttp://192.168.10.1。
詳細については, Cudy ルーターの Web インターフェイスにログインするにはどうすればいいですか?
ステップ2:クイックセットアップウィンドウがポップアップ表示されるので, 「ワイヤレスアクセスポイントをクリックし, 「次'。
ステップ3:'を選択してくださいタイムゾーン。
ステップ4:ハードウェアの接続を確認します。
ステップ5:ワイヤレス ネットワークの名前とパスワードを変更します。
ステップ6:クリック "保存して適用」をクリックして設定を完了します。
ステップ7:システムが再起動するまで数秒お待ちください。ログイン ページが再び表示されたら, インターネットをお楽しみいただけます。
注記：
Cudyルーターをアクセスポイントモードに設定すると, IPアドレスはホストルーターによって割り当てられ, デフォルトのIPアドレス192.168.10.1ではログインできなくなります。Cudyルーターに再度ログインする必要がある場合は, 「http://cudy.net'ブラウザに入力するか, メイン (プライマリ) ルーターのクライアント リストで Cudy ルーターの IP アドレスを検索します。
44件のコメント
@Werner
Dear Customer，
Thank you for contacting Cudy support team.
Please set the AP to static IP address, then reboot the main router, and check again.
“Hi, I have installed a Cudy 1300 Outdoor AP on a clients site, did the complete setup and as a wireless access point. I had set static ip address for the AP but werent internet connection through the AP, I then changed the AP’s ip setting to dhcp. On the status page it shows that the AP is connected to the internet via the lan cable but when I connect my laptop other device to the wifi its not getting internet access. Also cannot pin the gateway ip address from my laptop, but on the diagnostics page of the ap I can ping the gateway ip address. Can you please help with this, as I have a wireless camera connected to this AP but cannot access it from my lan.”
Hi, I have installed a Cudy 1300 Outdoor AP on a clients site, did the complete setup and as a wireless access point. I had set static ip address for the AP but werent internet connection through the AP, I then changed the AP’s ip setting to dhcp. On the status page it shows that the AP is connected to the internet via the lan cable but when I connect my laptop other device to the wifi its not getting internet access. Also cannot pin the gateway ip address from my laptop, but on the diagnostics page of the ap I can ping the gateway ip address. Can you please help with this, as I have a wireless camera connected to this AP but cannot access it from my lan.
@Steve,
Dear Customer,
Thank you for contacting Cudy support team. Please follow the steps:
1. Set the LAN IP address to the same subnet of the main router, it will be easy to login to the web page.
2. Set the WiFi SSID and password as you want.
3. Disable the DHCP server of the P5.
Then you can connect to the main router and use it as a AP.
“I have configured my P5 router, now I’d like to change it to Access Point. I can not see in the web interface any references at all to operation mode. How do I change the operation mode from wireless router to Access Point router?”
@Rafal,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has sent you the solutions via email. Please check.
“Hi. I have an LT500 router upstairs with sim card and another downstairs connected in AP mode via ethernet cable to the 1st one due there is very little wifi signal coming between floors through the ceiling. It works well but results in 2 different wifi networks upstairs and downstairs. So when moving between rooms devices not always switch to the network with better signal. How to make it one network with same login and password on both floors? Is it possible to configure a mesh in this situation?”
I have configured my P5 router, now I’d like to change it to Access Point. I can not see in the web interface any references at all to operation mode. How do I change the operation mode from wireless router to Access Point router?