4-Port Gigabit Industrial Switch with 2 SFP Slots

Name: 4-Port Gigabit Industrial Switch with 2 SFP Slots, IG1004S2 2.0
Brand: Cudy

4-Port Gigabit Industrial Switch with 2 SFP Slots, IG1004S2 2.0

IG1004S2 2.0

Varianti di prodotto

A 4-GbE 2-SFP industrial switch for networking in harsh conditions such as manufacturing, transportation, maritime, oil & gas, and mining.

4× GbE, Shielded, ±6kV Surge Resistant
2× 2.5G SFP
IP40, -40~85°C (-40~185°F)
Dual-Power Redundancy, 9.6~60V Range
Polarity Reverse Protection
Short Circuit Protection
Broadcast Storm Prevention On/Off
Extend On/Off, VLAN On/Off
Integrated DIN-Rail Bracket

Visualizza dettagli completi

Versione del modello
Versione del modello	IG1004S2 2.0
Interfaces
Interfaces	2.5G SFP Slots	2
	Gigabit RJ45 Ports	4
	Shielded RJ45 Port	True
	Extend Mode Ports	#1~#4
	VLAN Mode Ports	#1~#4
	LED	Power 1 Power 2 Link/ACT of Each Ethernet Port
	Power Input	4-Pin Terminal Block
	Physical Buttons	VLAN On/Off Extend On/Off Broadcast Storm Prevention On/Off
Performance
Performance	Copper Speed and Distance	Cat. 3 or higher cable: 100 meters at 10 Mbps Cat. 5 or higher cable: 100 meters at 100 Mbps Cat. 5e or higher cable: 100 meters at Gigabit Cat. 5e or higher cable: 250 meters at 10 Mbps Cat. 5e or higher cable: 100 meters at 2.5 Gbps
	Copper Speed and Distance Note	250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated. 2.5 Gbps speed is only available on the SFP slot with a 2.5G SFP module installed.
	Optical Spec and Distance	Depends on the Installed Optical Module
	MAC Address Table	2048
	Max Switching Capacity	18 Gbps
	Max Forwarding Rate	13.392 Mpps
	Jumbo Frame	9 KB
	Packet Buffer	2 Mbit
Power
Power	Power Methods	DC
	Power Redundancy	Dual Inputs
	DC	9.6-60V⎓
	Max Power Consumption	4.0W
	Idle Power Consumption	1.4W
	Polarity Reverse Protection	True
	Short Circuit Protection	True
Switching
Switching	802.3 Protocols	802.3i 10BASE-T 802.3u 100BASE-TX 802.3ab 1000BASE-T 802.3z 1000BASE-X 802.3bz 2.5GBASE-T 2.5GBASE-X 802.3x Flow Control
Reliability
Reliability	Grounding Methods	Grounding Point
	Safety	IEC/EN 62368
	EMC	EN55032 Class A EN55035 Class A
	EMI	FCC 47 CFR Part 15B Class A
	EMS	IEC/EN 61000-4-2, Level 4 ESD: Contact: 8kV; Air: 15kV IEC/EN 61000-4-3, Level 4 RS: 80 MHz to 1 GHz: 10 V/m IEC/EN 61000-4-4, Level 4 EFT: Power: 2kV; RJ45: 4kV IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 6kV IEC/EN 61000-4-6, Level 3 CS: 10V IEC/EN 61000-4-8, Level 5 PFMF IEC/EN 61000-4-9, Level 5 PMF IEC/EN 61000-4-10, Level 5 DOMF
	EMS Note	The levels listed in each EMS field are the highest level defined in the IEC/EN standard.
	Shock	IEC 60068-2-27
	Vibration	IEC 60068-2-6
	Free Fall	IEC 60068-2-32
	Environment	Operating Temperature: -40 ℃ ~ 85 ℃ (-40 ℉ ~185 ℉) Storage Temperature: -40 ℃ ~ 85 ℃ (-40 ℉ ~ 185 ℉) Operating Humidity: 5% ~ 95% non-condensing Storage Humidity: 5% ~ 95% non-condensing
Mechanical
Mechanical	Dimension	144×103×47.5 mm 5.67×4.06×1.87 inches
	Casing Material	Aluminum
	Ingress Protection	IP40
	Installation	DIN-Rail
Package Content
Package Content	IG1004S2 Installation Guide

Paese/Area geografica

4-Port Gigabit Industrial Switch with 2 SFP Slots

4-Port Gigabit Industrial Switch with 2 SFP Slots, IG1004S2 2.0

IG1004S2 2.0

InfoCard Size: 10 × 15cm

What to do next?