1. הורד את הקושחה העדכנית ביותר מ-מרכז ההורדות.
2. פתחו את הקובץ שהורדתם
3. הפעל את מכשיר ה-Cudy, המתן עד שנורת ה-LED תידלק באופן קבוע.
4. התחברו לרשת של Cudy באמצעות WiFi או Ethernet.
5. פתח דפדפן אינטרנט ועבור אלhttp://cudy.netאוֹhttp://192.168.10.1.
לפרטים, אנא עיינו באיך להתחבר לממשק האינטרנט של הנתב Cudy?

6. שדרג את הקושחה.
א.הגדרות מתקדמות -> קושחה, בחר את הקושחה שפרצת כדי להעלות.
ב.הגדרות כלליות->קושחההדף יכול לבצע שדרוג מקוון ועדכון מקומי.
פֶּתֶקתמיכה רק ב-Firmware 2.x.x ומעלה.

7. המתנה של 5 דקות להפעלה מחדש של הנתב.
176 comments
@Estimado Snheider:
Intente cambiar el navegador web para actualizar el router. Le sugiero que utilice Chrome o Edge.
Si sigue sin funcionar, pruebe con otro ordenador.
“Ya e intentado 2 veces actualizar mi router ax1500, una vez que hago todo los paso, se cae la conexión a internet hasta que lo apagó, cuando lo enciendo todo normal pero en la misma versión que estaba”
Firmware EU 1.0 (Official .bin)
Ya e intentado 2 veces actualizar mi router ax1500, una vez que hago todo los paso, se cae la conexión a internet hasta que lo apagó, cuando lo enciendo todo normal pero en la misma versión que estaba
@Dear Sakis,
Please try to change the web browser to update the router. I suggest the chrome or edge.
If still fail, please try to change a computer.
“It is impossible to update the Cudy WR1500 that I bought.
I follow the instructions exactly. I am sure that I am not doing anything wrong.
I try to install the intermediate—L101-1.0.4-20241205-747393-mid-flash.bin first, it tells me that the installation is successful, I wait 3 minutes and then… the led flashes once blue and once red.
I turn off the power, turn it back on after a minute, it works again but the intermediate update is not installed so it does not recognize the latest update 2.3.10”
It is impossible to update the Cudy WR1500 that I bought.
I follow the instructions exactly. I am sure that I am not doing anything wrong.
I try to install the intermediate—L101-1.0.4-20241205-747393-mid-flash.bin first, it tells me that the installation is successful, I wait 3 minutes and then… the led flashes once blue and once red.
I turn off the power, turn it back on after a minute, it works again but the intermediate update is not installed so it does not recognize the latest update 2.3.10