כיצד להתאים אישית הגדרות אלחוטיות בנתב Cudy?

@Cher Jonathan,
Veuillez vous rendre dans « Paramètres généraux » puis « Sans fil » pour modifier le mot de passe Wi-Fi. Vous pouvez également essayer d’utiliser l’application Cudy pour gérer votre routeur. Ce sera plus simple avec l’application.

“Bonjour , j’ai remarqué que plusieurs personnes ont accès à mon wifi et j’aimerais modifier le mot de passe, que faire?”

Bonjour , j’ai remarqué que plusieurs personnes ont accès à mon wifi et j’aimerais modifier le mot de passe, que faire?

Quiero cambiar la contraseña del router y no como cambiar la contraseña

@Dear Hein,
Thank you very much for you detailed feedback. We will provide your feedback to our R&D team. We will try to improve this situation in the future.

“Hi,

I’d like to report that the WR3600 mesh functionality is worse than having a group of APs in standalone mode. My two are connected via cable.

There is no benefit in having my two WR3600s meshed apart from just the config being applied to both units.

Drawbacks:
The biggest issue is that the two WR3600s keep on choosing the same channel. My IOT devices on 2.4GHz kept on dropping connection, perhaps because all of them are talking on the same band. This is silly. I’ve raised this before, but Cudy have not yet been able to fix this. Breaking my mesh into standalone units has resulted in a much better wireless experience for me. My device now all connect happily.

I can’t see from my main unit to which band a device connects to on another unit. After having two separate instances, I could see that some devices were connected to a band I didn’t want and I could correct this. This was not visible when in mesh mode.

Local latency, I.E. from my phone to default gateway also dropped from 70ms (Mesh) to about 6ms (standalone). This is while being about 7m away from my AP. No other change was made apart from going standalone.

I hope this helps someone else as I was about to replace my WR3600s. My experience is now much improved."

@Dear MN,
Sorry for replying so late due to the Chinese Spring Festival！ We will follow this issue and fix it. Please wait patiently.

“@Support

The issue is that when I configure the device to WPA2-only mode, the obsolete WPA1 protocol remains active. I have reported this multiple times, and you have stated it is not happening. However, my testing confirms it is. This situation suggests either a critical bug in the firmware or a lack of technical understanding of the issue on your support team. Please investigate this seriously"