לקוח VPN הוא התקן קצה או תוכנה המשמשים ליצירת חיבור מאובטח בין משתמש לשרת VPN.
מה זה VPN?
VPN (רשת פרטית וירטואלית) עוזרת לך לגשת למשאבי אינטרנט מרחוק, בצורה מאובטחת ופרטי בעזרת טכנולוגיית מנהור. ה-VPN מצפין את המידע האישי שלך ומסתיר את כתובת ה-IP שלך מהציבור כשאתה משתמש באינטרנט. עבור משתמשי ה-VPN, זה ייראה כאילו המחשבים היו מחוברים ישירות זה לזה.
טופולוגיית רשת משותפת:

כאן ניקח את WR2100 כהדגמה.
שלב 1:פתח דפדפן אינטרנט ועבור אלhttp://cudy.netאוֹhttp://192.168.10.1.
לפרטים, אנא עיינו באיך להתחבר לממשק האינטרנט של נתב Cudy?
שלב 2:לחץ עלהגדרות כלליות->VPNולהפעילVPN.

כלל ברירת מחדל: אפשר את כל המכשיריםאוֹחסום את כל המכשיריםלהשתמש ב-VPN.
כדי לציין את ההתקן, לחצו עלסטטוס המערכת->מכשירים->VPNכדי להפעיל או להשבית אותו.

מאתר לאתר:לאפשר למכשירים בשני אתרים לתקשר זה עם זה.
מדיניות VPN:
השבת:אין הגדרה נוספת.
מתג השבתת VPN:כבה את חיבור האינטרנט כאשר חיבור ה-VPN אבד.
תְחוּם:ציינו אילו דומיינים עוברים דרך ה-VPN ואילו לא
רשת משנה מרוחקת:ציין אילו תת-רשתות עוברות דרך ה-VPN ואילו לא
שלב 3:ב-פּרוֹטוֹקוֹלברשימה, בחר את הרשת שאתה צריך והזן את פרטי ה-VPN שסיפק ספק ה-VPN שלך.
•PPTP VPN
הזן את כתובת שרת ה-VPN (לדוגמה, 113.92.73.163) ואת שם המשתמש והסיסמה של ה-VPN שסופקו לך על ידי ספק ה-VPN.

•VPN L2TP
הזן את כתובת שרת ה-VPN (לדוגמה 113.92.73.163), שם משתמש וסיסמה של ה-VPN, ומפתח משותף מראש שסופק על ידי ספק ה-VPN שלך.
אם ספק ה-VPN שלך מספק לך גם את כתובת ה-IP של המנהרה שמתחברת לחשבון, תוכל להפעיל אתהשתמש בכתובת IP מותאמת אישית של המנהרהאוֹפְּצִיָה.

•OpenVPN
לחץ עלדפדפןכדי לייבא את קובץ התצורה שסופק על ידי ספק ה-VPN שלך.


• WireGuard VPN
לחץ עלדפדפןכדי לייבא את קובץ התצורה שסופק על ידי ספק ה-VPN שלך.

המִמְשָׁקולְהָצִיץיסונכרן אוטומטית מספק ה-VPN שלךקובץ CONF.

• עבד ZeroTier
הקלד אתמזהה רשת ZeroTierוכְּנִיסָהמסופק על ידי מאסטר ה-ZeroTier. ניתן למצוא את השער בחלק סטטוס ה-VPN.


מאמר קשור: כיצד לחבר מרחוק את נתב Cudy דרך Zerotier? - Cudy Home
186 comments
@Alessandro
Dear Customer,
Thank you for contacting Cudy support team. Our technical support has contacted you via email. Please check.
“I have a Cudy WR6500 and I set up OpenVPN from NordVPN following their instructions (https://support.nordvpn.com/hc/it/articles/31761845199121-Come-configurare-una-VPN-su-un-router-Cudy) but it doesn’t work: the VPN Status is Not Connected and Tunnel IP is 0.0.0”
I bought a cudy ac1200 with wireguard. I generated a config file on the server and uploaded it to the cudy router. The problem is that from location A I can’t ping or connect to location B (cudy router client wireguard), but in the opposite direction it works fine.
I have a Cudy WR6500 and I set up OpenVPN from NordVPN following their instructions (https://support.nordvpn.com/hc/it/articles/31761845199121-Come-configurare-una-VPN-su-un-router-Cudy) but it doesn’t work: the VPN Status is Not Connected and Tunnel IP is 0.0.0.0
@Dear Costas,
Please try to enable the VPN Kill Switch function and check if the problem fixed?
“I have a Cudy AX3000 and I set up WireGuard from Surfshark, but even though the IPv6 switch in the router settings is off, my device’s real location continues to be visible (it only works correctly when IPv6 is disabled on the device i.e. pc, mobile). Surfshark itself told me that they do not support IPv6, and any device that connects to my VPN is unprotected, which is also evident on the Surfshark check page. Is there any idea or solution as the IPv6 switch is off but IPv6 visible?”
I have a Cudy AX3000 and I set up WireGuard from Surfshark, but even though the IPv6 switch in the router settings is off, my device’s real location continues to be visible (it only works correctly when IPv6 is disabled on the device i.e. pc, mobile). Surfshark itself told me that they do not support IPv6, and any device that connects to my VPN is unprotected, which is also evident on the Surfshark check page. Is there any idea or solution as the IPv6 switch is off but IPv6 visible?