כיצד אוכל להגדיר את לקוח ה-VPN לגשת לשרת VPN מרוחק?

@Andy,
Please enable the VPN policy and set it to VPN Kill Switch. Then the problem will be fixed.
“Hi Cudy support,

I have a Cudy Travel Router TR1200 in a WISP operation mode and configured a Wireguard VPN client. In the devices list the VPN option is enabled and also the VPN connection is active. But somehow my traffic is not routed over the VPN because I still get my home ip as my ip-number on a site as whatsmyip. What could be wrong in the setup or is the VPN not supported on a WISP operation mode?"

Hi Cudy support,

I have a Cudy Travel Router TR1200 in a WISP operation mode and configured a Wireguard VPN client. In the devices list the VPN option is enabled and also the VPN connection is active. But somehow my traffic is not routed over the VPN because I still get my home ip as my ip-number on a site as whatsmyip. What could be wrong in the setup or is the VPN not supported on a WISP operation mode?

@Dear Lukas，
Destination: subnet 192.168.10.0 mask 255.255.255.0 Next hop is 198.18.5.4.

“wireguard server has these static routing settings options. Destination subnet mask metric what to forward from router CUDY? destination is 192.168.10.0 or vpn address 198.18.5.4 subnet mask 255.255.255.0 metric 100”

wireguard server has these static routing settings options. Destination subnet mask metric what to forward from router CUDY? destination is 192.168.10.0 or vpn address 198.18.5.4 subnet mask 255.255.255.0 metric 100

@Dear Lukas，

You must add a static rule on the VPN server. The destination is the LAN subnet of the cudy AC1200, the gateway is the tunnel IP address of the cudy AC1200, the interface is the VPN interface, Then try again.

“I bought a cudy ac1200 with wireguard. I generated a config file on the server and uploaded it to the cudy router. The problem is that from location A I can’t ping or connect to location B (cudy router client wireguard), but in the opposite direction it works fine.”