מצבי הפעלה וטופולוגיות של C200P

ה-C200P הוא התקן רשת רב-תכליתי המשלב פונקציונליות של נתב ובקר AP, ומציע שני מצבי פעולה:נתב ראשי ובקר AP(ברירת מחדל) ובקר APהוראה זו מספקת הוראות התקנה והמלצות לטופולוגיית רשת לביצועים אופטימליים.

1. נתב ראשי ובקר AP (ברירת מחדל)

במצב זה, ה-C200P מתפקד גם כנתב וגם כבקר AP.
מומלץ לנהל≤10 נקודות גישהו≤100 לקוחות.

טופולוגיה 1: אינטרנט - C200P - מתג - נקודות גישה

  • מקרה שימושמתאים לניהול מספר נקודות גישה (דורש מתג להרחבת קיבולת הפורטים).
  • דרישות התקנה:
    • חבר את המודם ליציאת ה-WAN של C200P, את יציאת ה-LAN של C200P למתג, ואת נקודות הגישה למתג.
    • ודא שה-C200P וה-AP נמצאים במצבאותו VLAN, מכיוון שתעבורת ניהול AP אינה נושאת תגי VLAN.
  • תמיכה ב-VLAN של SSID:
    • הפעלת SSID VLAN תגרום לנתוני הלקוח לשאת תג VLAN כאשר הם נשלחים מ-AP.
    • ה-C200P אינו תומך ברשתות VLAN או ממשקי VLAN.
    • כדי להפעיל רשתות VLAN של SSID, על המתג לתמוך ברשתות VLAN, ממשקי VLAN ושרתי DHCP כדי להקצות כתובות IP ללקוחות אלחוטיים ברשת VLAN של SSID.

טופולוגיה 2: אינטרנט - C200P - נקודות גישה

  • מקרה שימוש:מתאים לרשתות קטנות עם≤4 נקודות גישה(מוגבל על ידי 4 יציאות ה-LAN של ה-C200P).
  • דרישות התקנה:
    • חבר את המודם ליציאת ה-WAN של C200P ואת נקודות ה-AP ישירות ליציאות ה-LAN של C200P.
    • ה-C200P, נקודות הגישה ולקוחות האלחוטיים פועלים ב-אותה רשת.
  • תמיכה ב-VLAN של SSID:
    • רשתות VLAN של SSID הןלא נתמךבטופולוגיה זו, מכיוון שה-C200P אינו תומך ב-VLAN או ממשקי VLAN.

פֶּתֶק:ה-C200P יתמוך ב-VLAN ובממשק VLAN באמצעות שדרוג קושחה בעתיד. בשלב זה, ניתן יהיה לתמוך ב-SSID VLAN בטופולוגיות 1 ו-2 הנ"ל מבלי שהמתג יתמוך ב-VLAN.

2. מצב בקר AP

במצב זה, ה-C200P מתפקד אך ורק כבקר AP, ומנהל את תצורת AP ואת נתוני האימות של Captive Portal.

זה תומך≤200 נקודות גישה, כאשר מספר התקני הלקוח מוגבל רק על ידי קיבולת השער או המתג.

טופולוגיה: אינטרנט - נתב - מתג - נקודות גישה ו-C200P

  • דרישות התקנה:
    • חבר את המודם לנתב, את הנתב לסוויץ', ואת ה-C200P ואת נקודות הגישה לסוויץ'.
    • שנה את ה-C200P למצב בקר AP:
      • התחבר לממשק האינטרנט של C200P.
      • נווט אלהתקנה מהירהובחרבקר APמצב.
    • ודא שה-C200P וה-AP נמצאים במצבאותו VLAN, מכיוון שתעבורת ניהול AP אינה נושאת תגי VLAN.
  • תמיכה ב-VLAN של SSID:
    • כדי להפעיל רשתות VLAN של SSID, השער או המתג חייבים לתמוך ברשתות VLAN, ממשקי VLAN ושרתי DHCP כדי להקצות כתובות IP ללקוחות אלחוטיים ברשת VLAN של SSID.

לסיוע נוסף, צרו קשר עם צוות התמיכה שלנו בכתובת support@cudy.com.

Back to blog

53 comments

So routing between vlans its enabled and i am not able to disable it

Lubos

And one more question, is there firewal between VLANS ? I make few vlans for test and from every vlan i am able to access cudy GUI with multiple scenarios (enabled management VLAN, disabled managemnt VLAN) etc. In current situation its just create multiple DHCP servers and clients are able to reach others acros VLANS. No efect what are we expecting from VLAN settings

Lubos

When do we have firmware update for wall APs as descipted in c200p update release:

Note: Features 6–9 require AP firmware version 2.5.x or later.

Thank you

Lubos

Thanks for the update for C200P. Now only alias mode for R700 and we are done :D just kidding but this should be great.

Lubos

Hello Cudy Support,

Thank you for your previous response regarding the firmware update for the C200P.

As I understand it, the new firmware that should add support for WAN IP aliasing is still under development. While waiting for that version, I would like to ask whether it would be possible to obtain a firmware build with SSH access enabled, or an official method to enable SSH access.

My only goal is to configure an additional IP address (WAN alias / secondary WAN IP) on the WAN interface, which is currently not possible through the web interface. I am comfortable working with Linux/OpenWrt-based systems and would be happy to use SSH for this purpose until the official firmware becomes available.

I am currently evaluating the C200P for a larger deployment and plan to purchase approximately 200 units. The missing WAN alias functionality is currently the only feature preventing me from starting the implementation. I would prefer not to wait for the final firmware release if there is already a beta firmware, engineering firmware, or another supported way to enable SSH access and configure this feature.

Even a temporary solution with SSH access would help me move forward with testing and deployment planning.

Thank you for your help and support. I look forward to your response.

Best regards,

Lubos

Leave a comment