Avertissements
Cette page web répertorie les logiciels des appareils compatibles avec OpenWrt. Avant de télécharger et d'installer le logiciel, veuillez noter qu'OpenWrt est un système d'exploitation Linux destiné aux appareils embarqués. Au lieu de créer un firmware unique et statique, OpenWrt propose un système de fichiers entièrement accessible en écriture avec gestion des paquets. Cela vous libère de la sélection et de la configuration des applications proposées par le fournisseur et vous permet de personnaliser l'appareil grâce à des paquets adaptés à chaque application. Pour les développeurs, OpenWrt est le framework permettant de créer une application sans avoir à développer un firmware complet ; pour les utilisateurs, cela signifie une personnalisation complète et une utilisation de l'appareil inédite.
Description
- Ce fichier ne peut être utilisé que lorsque votre routeur fonctionne sous l'interface Web Cudy.
- Si le routeur fonctionne déjà avec l'interface utilisateur OpenWRT, l'utilisateur doit d'abord restaurer le firmware officiel Cudy, puis mettre à jour le routeur avec ce firmware.
- Comment restaurer le firmware officiel Cudy du routeur ? Veuillez lire le fichier readme dans le fichier téléchargé.
Garantie:
Cudy déclare par la présente
- Nous, Cudy, n'assumons aucune garantie pour tout logiciel qui n'est pas publié par Shenzhen Cudy Technology Co., Ltd.
- Nous n'assumons aucune garantie pour les produits sur lesquels sont installés des logiciels non publiés par Shenzhen Cudy Technology Co., Ltd.
- Si vous devez utiliser le logiciel OpenWRT, nous vous suggérons de le télécharger depuis le site officiel de Cudy.
Téléchargez le micrologiciel OpenWrt pour supprimer la vérification de signature :Conduire
OpenWrt Firmware Finder (non publié par Cudy) :Sélecteur de micrologiciel OpenWrt
1295 commentaires
@Dear Guglielmo,
No, the OpenWrt firmware for WR1300 3.0 and 4.0 are different. We must wait for some developer to develop the OpenWrt firmware for WR1300 4.0 first. Then we can offer the intermediate firmware for WR1300 4.0.
“Hello, I have baught a bunch of WR1300. Some of them are v3, but some came as v4. On v3 i could download the intermediate firmware and the install OpenWrt. Are you going to release the same for v4? I’d like to install openwrt also on them. Thank you! With OpenWrt this is a great product”
@Dear Tod,
Our technical support has sent you the firmware via email. Please check.
“Hello, Would it be possible to send me the TR3000 (256mb flash) intermediary firmware?
It says the file is invalid when I try to upgrade it with TR3000 V1.
Thank you in advance."
@Dear Tomáš,
Our technical support has sent you the firmware via email. Please check.
“Hello,
Could you please provide the signed OpenWrt sysupgrade intermediary firmware for the AP3000 v1.0 Ceiling model, via email or ideally via your Google Drive repository?
Thank you for your support.
Best regards,
Tomáš Stejskal"
@Dear atish,
1. Please recover the firmware to the Cudy official firmware. Here is the instruction attached. Please download the Cudy official firmware 2.4.7 or later, then rename it to the recovery.bin to recover. You can download the firmware on the website below.
https://www.cudy.com/pages/download-center/tr3000-1-0
2. We have changed the model of the flash in the router TR3000 1.0. So the old intermediate firmware and OpenWrt firmware for TR3000 1.0 will not work. Please use the new intermediate firmware.
3. You must add the patch to the OpenWrt firmware, the the OpenWrt firmware will work. If you know how to upload it to the OpenWrt project. Please help to do it. The patch is also attached.
“hi , i am trying to install the signed software on my tr3000 to install openwrt, but gets stucked , can u please provide me with the new signed firmware . i had tried to do it on earlier router and it had gone through. i think the company has installed a new flash version whats why it is not going through . please check and revert back .”
Hi,
I do have TR3000 256MB. Can I get the intermediate firmware, thanks a lot.