Avertissements
Cette page web répertorie les logiciels des appareils compatibles avec OpenWrt. Avant de télécharger et d'installer le logiciel, veuillez noter qu'OpenWrt est un système d'exploitation Linux destiné aux appareils embarqués. Au lieu de créer un firmware unique et statique, OpenWrt propose un système de fichiers entièrement accessible en écriture avec gestion des paquets. Cela vous libère de la sélection et de la configuration des applications proposées par le fournisseur et vous permet de personnaliser l'appareil grâce à des paquets adaptés à chaque application. Pour les développeurs, OpenWrt est le framework permettant de créer une application sans avoir à développer un firmware complet ; pour les utilisateurs, cela signifie une personnalisation complète et une utilisation de l'appareil inédite.
Description
- Ce fichier ne peut être utilisé que lorsque votre routeur fonctionne sous l'interface Web Cudy.
- Si le routeur fonctionne déjà avec l'interface utilisateur OpenWRT, l'utilisateur doit d'abord restaurer le firmware officiel Cudy, puis mettre à jour le routeur avec ce firmware.
- Comment restaurer le firmware officiel Cudy du routeur ? Veuillez lire le fichier readme dans le fichier téléchargé.
Garantie:
Cudy déclare par la présente
- Nous, Cudy, n'assumons aucune garantie pour tout logiciel qui n'est pas publié par Shenzhen Cudy Technology Co., Ltd.
- Nous n'assumons aucune garantie pour les produits sur lesquels sont installés des logiciels non publiés par Shenzhen Cudy Technology Co., Ltd.
- Si vous devez utiliser le logiciel OpenWRT, nous vous suggérons de le télécharger depuis le site officiel de Cudy.
Téléchargez le micrologiciel OpenWrt pour supprimer la vérification de signature :Conduire
OpenWrt Firmware Finder (non publié par Cudy) :Sélecteur de micrologiciel OpenWrt
1292 commentaires
@Dear Dan,
Do you remember what is firmware version before update to the OpenWrt firmware? If it was 2.4.7, you can recover it via the TFTPD tool. Please refer to this article.
https://www.cudy.com/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware?pos=1&_sid=b2bfff253&ss=r
If other firmware version, please keep using the OpenWrt firmware. Can not be recovered.
“Dear Cudy support team,
I am trying to restore the factory firmware after OpenWrt on AP3000 V1.0, but I am facing a problem.
Device information:
- Model: AP3000 V1.0
- Serial number: AP3000_P251600697 EU1.0
- Current firmware: OpenWrt 25.12.0
The problem is:
When trying to flash through the openwrt web interface (without saving the settings):
I downloaded the file “AP3000-R49-2.4.7-20260115-152710-sysupgrade.bin”, but the router rejects it with the error “Invalid file”.
According to the instructions for returning: Connected directly to a PC with IP:192.168.1.10, holding reset
Connected the power. But in this case, I can’t connect to the router. The special interface for specifying the firmware file doesn’t open at the address 192.168.1.1.
For the OpenWrt firmware, you provided a special firmware for the transition. I understand that you also need a special version to return to the factory firmware.
Please help me return to the factory firmware.
Thank you for your assistance. Best regards, Dan
"
@Dear Александр,
The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
For WR3000 V2.0, it is impossible to develop the OpenWrt firmware currently.
“Please tell me when the OpenWRT firmware for WR3000 V2.0 will be available.”
@Dear Андрей,
I just uploaded the intermediate firmware for WR1300S V1.0 to the Google Drive. You can download it.
“When will there be an openwrt for WR1300S ? The kernel and sysupgrade were previously sent”
Здравствуйте, Павел,
Наша служба технической поддержки отправила вам прошивку для перехода на WR3000 V1.0 по электронной почте.
“@@Уважаемый Павел,
У вас маршрутизатор WR3000 V1.0, а не WR3000E V1.0. Пожалуйста, используйте прошивку для WR3000 V1.0.
“Версия прошивки
2.4.19-20250828-192837
Аппаратная версия
WR3000 V1.0 SN:WR3000254901313 EAEU1.0" Где ее скачать на гугл диске ее нет. Вышлите переходную прошивку на почту"
Please tell me when the OpenWRT firmware for WR3000 V2.0 will be available.