Hoiatused
See veebileht loetleb OpenWrt süsteemi toetavate seadmete tarkvara, enne tarkvara allalaadimist ja paigaldamist palume arvestada, et OpenWrt Project on Linuxi operatsioonisüsteem, mis on suunatud manussüsteemidele. Selle asemel, et püüda luua üksikut staatilist püsivara, pakub OpenWrt täielikult kirjutatavat failisüsteemi koos paketihaldusega. See vabastab teid müüja poolt pakutavate rakenduste valikust ja konfiguratsioonist ning võimaldab teil kohandada seadet pakettide abil mis tahes rakendusele sobivaks. Arendajate jaoks on OpenWrt raamistik, mille abil saab luua rakenduse, ilma et oleks vaja ehitada selle ümber täielikku püsivara; kasutajate jaoks tähendab see võimalust täielikuks kohandamiseks, et kasutada seadet viisil, mida nad pole kunagi ette kujutanud.
Kirjeldus
- Seda faili saab kasutada ainult siis, kui teie ruuter töötab Cudy veebi kasutajaliidese all.
- Kui ruuter juba töötab OpenWRT UI all, peaks kasutaja esmalt taastama selle Cudy ametliku firmware'ile. Ja seejärel uuendada ruuterit selle püsivara abil.
- Kuidas taastada ruuter Cudy ametlikule püsivara? Palun lugege alla laaditud faili readme.
Garantii:
Cudy deklareerib käesolevaga
- Me, Cudy, ei võta garantiid ühegi tarkvara eest, mida ei ole välja andnud Shenzhen Cudy Technology Co., Ltd. .
- Me ei võta garantiid toodete eest, millele on paigaldatud tarkvara, mida ei ole välja andnud Shenzhen Cudy Technology Co., Ltd. .
- Kui teil on vaja kasutada openwrt tarkvara, soovitame selle alla laadida Cudy ametlikust veebisaidist.
Laadige alla OpenWrt püsivara, et eemaldada allkirja kontroll: Ajama
OpenWrt Firmware Finder (ei ole Cudy poolt välja antud): OpenWrt Firmware Selector
1319 comments
A few weeks ago I tried to contact you by email but I haven’t heard back. Can you please send me the firmware image for the AP3000? Is there an explanation on why it is not on the Google Drive?
@Dear Serious,
Please just use the firmware in “WR3000+V1 without recovery TFTP”. It is correct. Since many comnputers detect the TFTP server tool as a virus, and can’t download the file. So I removed it.
“Hello!
Similar to user, Vasilis, I am looking to flash OpenWrt on my Cudy WR3000 router. It is my main and only router at the moment.
In the Cudy Intermediary Firmware Google Drive link, the firmware file is named, “WR3000+V1 without recovery TFTP”. The without recovery part is making me nervous. Is that the only Intermediary Firmware file we have for this router? I see that user Vasilis had issue with that file making his device soft-brick. So I have not tried it yet. If there’s a more appropriate Intermediary Firmware file available for Cudy WR3000 V1 then please send me the file. I will really appreciate it.
I am looking forward to your response.
Regards.”
@Dear TR3000 256MB,
Your router is TR3000 256MB 1.0, not the TR3000 1.0. So you have updated the wrong firmware. Our technical support has sent you the solutions via email. Please check.
“Hello,
Like many happy TR3000 owners I embarked on the journey to flash the new toy with Cudy’s temperary OpenWrt firmware that helps removing signature check down the road. Download and unzip worked well, but Firmware Upgrade failed with error “File is invalid. Please retry.
Uploaded File: cudy_tr3000-v1-sysupgrade.bin
Size: 12.63 MB (13241929 B)
MD5: b8333d8eebd067fcb43bec855ac22364”
Firmware Version 2.3.9-20250208-171917
Hardware TR3000 256MB FLASH V1.0
Thanks"
@Dear VASILIS,
Our technical support has sent you the firmware via email. Please check.
“Hi again, I’ve recovered the router. Now can you send me the correct Firmware to Remove Signature Check for WR3000 to work as an access point?”
Hello!
Similar to user, Vasilis, I am looking to flash OpenWrt on my Cudy WR3000 router. It is my main and only router at the moment.
In the Cudy Intermediary Firmware Google Drive link, the firmware file is named, “WR3000+V1 without recovery TFTP”. The without recovery part is making me nervous. Is that the only Intermediary Firmware file we have for this router? I see that user Vasilis had issue with that file making his device soft-brick. So I have not tried it yet. If there’s a more appropriate Intermediary Firmware file available for Cudy WR3000 V1 then please send me the file. I will really appreciate it.
I am looking forward to your response.
Regards.