MAC Filter on tehnoloogia, mida kasutatakse traadita ruuterites, et takistada volitamata juurdepääsu võrkudele. MAC-aadress on unikaalne identifikaator, mis määratakse igale seadmele võrgus. Traadita ruuter kasutab MAC-aadressi seadme tuvastamiseks ja selle määramiseks, millise võrguga see peaks ühenduma.
Data-mce-fragment="1">Makseta ruuter kasutab MAC-aadressi seadme tuvastamiseks ja selle määramiseks, millise võrguga see peaks ühenduma.Sepp 1: Avage veebilehitseja ja minge http://cudy.net või http://192.168.10.1.
Detailide saamiseks vaadake Kuidas sisse logida Cudy Routeri veebiliidesesse?
Sepp 2: Klõpsake täiustatud seaded -> MAC Filter jaotises Turvalisus.
Sepp 3: Kontrollige seaded MAC Filter lehel.
- Konkreetsete seadmete blokeerimiseks
1. Valige 'Luba kõik peale nimekirja'.
2. Valige blokeeritav(ad) seade(d) online seadmete nimekirjas seoses MAC-aadressi ja IP-aadressiga.
Kui blokeeritavat võrguseadet ei ole, minge selle Süsteemi staatus->Seadmed->kopeerige MAC-aadress->tagasi MAC Filter->Custom ja kleepige MAC-aadress.
3. Save &; Apply ja valitud seade ei saa enam ruuterist internetti.
1. Valige 'Listi lubamine ainulty'.
2. Valige seade(d), millele lubate interneti saamist.
3. Save &; Apply ja ainult valitud seadmed saavad internetiühenduse.
See on lihtne viis, kuidas saab teha sama nagu MAC Filter.
Internet
Võimaldab ja keelab Interneti ikooni, et kontrollida iga seadme juurdepääsu internetile.
'OPPO-Reno5-5G' ei saa alloleva ruuteri kaudu internetti.
Operatsioon
Klikkides ikoonil Operatsioon saab määrata seadmele uue nime.
Interneti ajuurdepääsu ajaline piiramine
Aeg, mille jooksul on seadmetele lubatud juurdepääs internetti.
Näide: Seadmel "Arvuti" on lubatud kasutada internetti ainult esmaspäeval kell 10-20.
12 comments
@Dear tonalt,
Our technical support has sent you the solutions via email. Please check.
“it seems that an activated mac-filter also has an effect on the guest-network in the sense that the router doesn’t connect a guest to the internet! LT700E.
i think most people don’t like this and even worse: the activated mac filter on the guest network is not editable and it even worser it doesn’t use the mac table that is defined for the main wifi network.
so the mac filter is completely useless if one allows a guest-network.
probably i am wrong and the guest network can connect a guest to the internet with an activated mac-filter. but if so, please tell what i can do, to achieve this.”
it seems that an activated mac-filter also has an effect on the guest-network in the sense that the router doesn’t connect a guest to the internet! LT700E.
i think most people don’t like this and even worse: the activated mac filter on the guest network is not editable and it even worser it doesn’t use the mac table that is defined for the main wifi network.
so the mac filter is completely useless if one allows a guest-network.
probably i am wrong and the guest network can connect a guest to the internet with an activated mac-filter. but if so, please tell what i can do, to achieve this.
@Dear William and Dragan,
Thank you for your kindly advice! We will provide your feedback to the product department for evaluation. In fact, we already have this plan to develop this feature.
“I completely agree with William. I just can’t believe this kind of oversight was made. MAC filtering still hasn’t been added to the latest firmware 2.3.12. Please update the firmware and give us that function.”
“I just bought the Cudy WR11000 WiFi 7 Router and want to use it as an Access Point with MAC Filtering. But I just found out that there is no way to enable MAC Filtering when it is in Access Point mode. Why? You need to allow MAC Filtering in Access Point mode Not just only in Router mode! Please update the firmware and give us that function. I am on the latest firmware version 2.2.19.”
mine is WR3600
I completely agree with William. I just can’t believe this kind of oversight was made. MAC filtering still hasn’t been added to the latest firmware 2.3.12. Please update the firmware and give us that function.