1. Laadige fail alla ja pakendage see hinnast.
2. Laadige uusim püsivara ametlikust veebisaidist ja nimetage see ümber "recovery.bin". Märkus: Te peate selle panema samasse faili Tftpd tööriistade hulka.
3. Lülitage ruuter välja. Tõmmake toiteadapter välja või vajutage nuppu POWER.
4. Ühendage arvuti ruuteri LAN-porti Ethernet-kaabliga.
5. Konfigureerige oma arvuti IP-aadressi '192.168.1.88' käsitsi.
6. Käivitage 'tftp32.exe'.
7. Käivita käsureas 'netsh advfirewall set allprofiles state off', et keelata Windowsi tulemüür, muidu blokeeritakse tftp. Või lülitage tulemüür välja oma arvuti juhtpaneelis. Nagu allpool näidatud.
8. Vajutage nuppu/auku "Reset" ja hoidke seda all. Enne ruuteri sisselülitamist ja enne, kui tftp alustab püsivara allalaadimist, ärge vabastage nuppu 'Reset' / auku.
9. Lülitage ruuter sisse.
10. Kui kõik tuled vilguvad kiiresti või kui tftp hakkab püsivara alla laadima, võite vabastada nupu 'Reset' nuppu/auku.
11. Kui tuli vilgub aeglaselt, on uuendamine lõpetatud.
12. Taastage oma arvuti IP-aadress dünaamiliseks IP-ks.
13. Valmis.
162 comments
@Dear Will,
TR1200 is different with other models. You must connect your computer to the WAN port of TR1200 when recovering. Please have a try.
“Hi, I tried all the steps above, but my TR1200 still isn’t being detected by TFTP. I tested on both Windows and Mac (using native TFTP), and also tried PuTTY to check for any serial logs, but didn’t see anything. Can you help please?”
Hi, I tried all the steps above, but my TR1200 still isn’t being detected by TFTP. I tested on both Windows and Mac (using native TFTP), and also tried PuTTY to check for any serial logs, but didn’t see anything. Can you help please?
@Dear spartak,
Please check the steps carefully one by one and try again.
“Cudy X6 (AX1800) v2
how to return to official firmware from OpenWRT?
From local 192.168.1.88 not download firmware”
Cudy X6 (AX1800) v2
how to return to official firmware from OpenWRT?
From local 192.168.1.88 not download firmware
@Dear Pablo,
The method that recover the WR1500 is different. Please follow the instruction I sent your email box.
“Hello, I have a problem with the WR1500. It updated to the latest firmware from 2.3.3 to 2.3.10 and now the router is no longer responding. The LED stays red and the router restarts. I tried tftp recovery on the WAN and LAN ports, but nothing happened.
I hope you can help me. Thank you very much.”