Mida on juurdepääsupunkti režiim?
Access Point režiimis kasutab ruuter traadiga ühendust esmase ruuteri või modemi ruuteriga, et laiendada koduvõrgu traadita leviala.
Üldine võrgutopoloogia:
Samm 1: Avadge veebilehitseja ja minge veebilehele http://cudy.net või http://192.168.10.1.
Detailide saamiseks vaadake Kuidas Cudy Routeri veebiliidesesse sisse logida?
.Samm 2: Avaneb aken Quick Setup, valige 'Wireless Access Point', seejärel klõpsake 'Next'.
Samm 3: Valige oma "Ajavöönd".
Samm 4: Kinnitage riistvaraühendus.
Samm 5: Muutke traadita võrgu nime ja parooli.
Sammu 6: Vajutage "Save & Apply", et lõpetada konfiguratsioon.
Samm 7: Oodake paar sekundit süsteemi taaskäivitamiseks, kui sisselogimisleht taas avaneb, saate nautida internetti.
Märkus:
Kui Cudy ruuter on seadistatud juurdepääsupunkti režiimi, määrab IP-aadressi vastuvõttev ruuter ja vaikimisi IP-aadressi 192.168.10.1 ei saa sisse logida. Kui teil on vaja uuesti Cudy ruuterisse sisse logida, sisestage brauserisse 'http://cudy.net' või vaadake Cudy ruuteri IP-aadressi oma peamise (esmase) ruuteri kliendiloendist.
56 comments
Hi
If i setup a Cudy Wr3000s/e/h/p (one of them) in wifi ap mode, im i still able to use the ethernet ports to connect to desktops / other clients?
can you also let me know the differences between the s/e/h/p models of wr3000?
thanks.
@Dear Mike,
Please follow the steps:
1. Please update the latest firmware 2.4.5 for AP1300. You can download the firmware on the website.
https://www.cudy.com/pages/download-center/ap1300-1-0
2. Please reset all the three AP1300 that you want to work as the submesh AP. Setup the Wi-Fi settings of the main mesh AP1300.
3. Install them in the same network (in the same management VLAN). The mesh system will be installed automatically.
4. Please test and check if the network in working normally, as you want.
“Hello Cudy Hardware & Software Developer’s team!)
I have 4 (four) Cudy AP1300. For my business project, I need build MESH with multi SSID via many VLAN’s:
SSID1 – VLAN10 – 192.168.10.0/24 – CORP-WIFI
SSID2 – VLAN20 – GUEST-WIFI
192.168.20.0/24
ETH1 trunk-mode (include VLAN10-VLAN20-VLAN30) – VLAN30 – 192.168.30.0/24 – MGMT & mesh connector.
How I do it?
All switches in my company support vlans”
Hello Cudy Hardware & Software Developer’s team!)
I have 4 (four) Cudy AP1300. For my business project, I need build MESH with multi SSID via many VLAN’s:
SSID1 – VLAN10 – 192.168.10.0/24 – CORP-WIFI
SSID2 – VLAN20 – GUEST-WIFI
192.168.20.0/24
ETH1 trunk-mode (include VLAN10-VLAN20-VLAN30) – VLAN30 – 192.168.30.0/24 – MGMT & mesh connector.
How I do it?
All switches in my company support vlans
@Dear Damian,
Sorry, M3000 doesn’t support this feature.
“Is it possible to implement multiple SSIDs for the M3000 model? I need this for a separate IoT network (in NAT or bridge mode – your choice).”
Is it possible to implement multiple SSIDs for the M3000 model? I need this for a separate IoT network (in NAT or bridge mode – your choice).