Mida on juurdepääsupunkti režiim?
Access Point režiimis kasutab ruuter traadiga ühendust esmase ruuteri või modemi ruuteriga, et laiendada koduvõrgu traadita leviala.
Üldine võrgutopoloogia:
Samm 1: Avadge veebilehitseja ja minge veebilehele http://cudy.net või http://192.168.10.1.
Detailide saamiseks vaadake Kuidas Cudy Routeri veebiliidesesse sisse logida?
.Samm 2: Avaneb aken Quick Setup, valige 'Wireless Access Point', seejärel klõpsake 'Next'.
Samm 3: Valige oma "Ajavöönd".
Samm 4: Kinnitage riistvaraühendus.
Samm 5: Muutke traadita võrgu nime ja parooli.
Sammu 6: Vajutage "Save & Apply", et lõpetada konfiguratsioon.
Samm 7: Oodake paar sekundit süsteemi taaskäivitamiseks, kui sisselogimisleht taas avaneb, saate nautida internetti.
Märkus:
Kui Cudy ruuter on seadistatud juurdepääsupunkti režiimi, määrab IP-aadressi vastuvõttev ruuter ja vaikimisi IP-aadressi 192.168.10.1 ei saa sisse logida. Kui teil on vaja uuesti Cudy ruuterisse sisse logida, sisestage brauserisse 'http://cudy.net' või vaadake Cudy ruuteri IP-aadressi oma peamise (esmase) ruuteri kliendiloendist.
56 comments
@Dear Mark,
Yes, it’s true. There is no Guest Network function when working on the Access Point mode.
“Hello, I’ve purchased one AX3000, I want to setup it as Access Point, not as router, I’ve read that is not possible setup a wifi for guest or setup additional SSID, is it true?
Thanks and regards,”
Hello, I’ve purchased one AX3000, I want to setup it as Access Point, not as router, I’ve read that is not possible setup a wifi for guest or setup additional SSID, is it true?
Thanks and regards,
@Dear Marian,
Thank you for your kindly advice! We will provide your feedback to the product department for evaluation.
“Add vlan support for the routers. Or give ssh access so the users can create their own VLANs. Dont limit the usage of the routers”
Add vlan support for the routers. Or give ssh access so the users can create their own VLANs. Dont limit the usage of the routers
@Dear naz,
Yes, the LAN ports are still work. You can connect the devices to the LAN ports to share the network.
For WR3000, the main difference is that it uses the 16MB Flash. Other routers use 128MB Flash. Then WR3000 has to delete some functions, such as IPSec VPN, DNS over TLS, Zerotoer VPN etc. Other routers support all of these functions.
“Hi
If i setup a Cudy Wr3000s/e/h/p (one of them) in wifi ap mode, im i still able to use the ethernet ports to connect to desktops / other clients?
can you also let me know the differences between the s/e/h/p models of wr3000?
thanks.”