Cudy Whole Home Mesh süsteem on loodud selleks, et kõrvaldada surnud tsoonid ja tagada katkematu Wi-Fi kogu teie kodus. See artikkel juhendab teid samm-sammult võrgusüsteemi ehitamisel.
Esvalmistus:
1. Veenduge, et teil on vähemalt 2 Cudy toodet.
2. Kõik Cudy tooted toetavad mesh-tehnoloogiat: Home Mesh-Cudy ametlik veebisait
3. Firmware on ajakohane: Download Center
4. Võtke need seadistamise ajal samasse ruumi.
5. Võtke need samasse ruumi. Lähtestage kõik oma Cudy tooted tehaseseadetele. (Kui seade on sisse lülitatud, vajutage ja hoidke RESET-nuppu koos näpuga 6s jooksul all, seejärel laske lahti.)
6. Seadistage oma esmane ruuter ja ühendage see internetiga.
Kui näited on M1800 ja WR2100:
Samm 1: Avage veebilehitseja ja minge veebilehele http://cudy.net või http://192.168.10.1.
Üksikasjalikumalt vt Kuidas Cudy Routeri veebiliidesesse sisse logida?
Samm 2: Vajutage süsteemi oleku lehel nupule "+".
Samm 3: Vajutage M1800-l WPS-nuppu ja seejärel WR2100-l WPS-nuppu.
Pääsevõrguüksus: Välkvalge
lisavõrguüksus: Vilgub vaheldumisi valge ja punane
Samm 4: See läheb "Scanning", seejärel " Connecting".
Samm 5: Oodake, kuni lisaruuteri süsteemi LED muutub helesiniseks, seejärel paigutage WR2100 ümber.
Samm 6: Edu ja naudi võrgusilma võrku.
Märkus:
1. 4/5G ruuterit saab seadistada ainult peamise võrgusilmaüksusena. Näiteks:
2. Te ei saa sisse logida lisavõrgu võrgusilma ruuteri veebiliidesesse. Kui soovite seadeid muuta, klõpsake "Süsteemi olek"->"Mesh".
90 comments
Thank you. How do I set the AX3000 , as wireless router , wireless acsess point ,wireless extender or WISP ?
@Dear Marc Pappin,
Yes, you can install mesh system with AP3000 and M3000. Please follow the steps:
1.Keep the three M3000 in the factory default status. Power them on next to the AP3000.
2. login to the webpage of AP3000, Click + to search the mesh nodes and then add all the three M3000 to be the satellite mesh nodes.
3. After mesh installed. You can move the three M3000 to the placement you want to place it.
“Hi, could I create a network, in the following sequence : AP3000, connected via a eth.cable to a non-cudy router . Router is connected via cable to WAN
After this proves to be stable I want to extend and create a mesh with 3 M3000 , all wireless.
Can the M3000 come off the AP3000, and if so how to set up and pair?
Thanks for your help"
@Dear Marc Pappin,
Yes, you can install mesh system with AP3000 and M3000. Please follow the steps:
1.Keep the three M3000 in the factory default status. Power them on next to the AP3000.
2. login to the webpage of AP3000, Click + to search the mesh nodes and then add all the three M3000 to be the satellite mesh nodes.
3. After mesh installed. You can move the three M3000 to the placement you want to place it.
“Hi, could I create a network, in the following sequence : AP3000, connected via a eth.cable to a non-cudy router . Router is connected via cable to WAN
After this proves to be stable I want to extend and create a mesh with 3 M3000 , all wireless.
Can the M3000 come off the AP3000, and if so how to set up and pair?
Thanks for your help"
Hi, could I create a network, in the following sequence : AP3000, connected via a eth.cable to a non-cudy router . Router is connected via cable to WAN
After this proves to be stable I want to extend and create a mesh with 3 M3000 , all wireless.
Can the M3000 come off the AP3000, and if so how to set up and pair?
Thanks for your help
@Dear Andy,
Yes, support. You can install mesh system with them.
“Are m3000 (ax3000) mesh unit compatible with later (BE11000 for example) mesh routers?”
Are m3000 (ax3000) mesh unit compatible with later (BE11000 for example) mesh routers?