Potencia, velocidad y control en uno
1 PoE In | 4 PoE Out
Experiencia de velocidad Gigabit
Modo VLAN
Modo extendido
FAQ
| Versión del modelo | ||
|---|---|---|
| Versión del modelo | POE40 2.0 | |
| Protocols | ||
| Protocols | 802.3 Protocols |
|
| PoE | ||
| PoE | Uplink Stream | 1× GbE, 802.3bt/at/af |
| Uplink PIN Assignment | Mode A / Mode B / Four-Pair | |
| Downlink Stream | 4× GbE, 802.3at/af | |
| Downlink Pin Assignment | Mode A | |
| Transimission Distance |
|
|
| Transimission Distance Note | 250-meter transmission is only available under the Extend mode. | |
| Interfaces | ||
| Interfaces | Physical Buttons |
|
| LED | Power | |
| Power | ||
| Power | Power Input | ≥60W is recommended |
| Max Power Output | 2× 30W or 4× 12.95W | |
| Max Power Output Note | The actual power output depends on input | |
| Max Power Consumption (W) | 2W | |
| Reliability | ||
| Reliability | Power Protection |
|
| EMC |
IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV IEC/EN 61000-4-5, Level 4 Surge: RJ45: CM 4kV |
|
| Environment |
Ambient Operating Temperature: 0~40℃ (32~104 ℉) Storage Temperature: -40~70 ℃ (-40~158 ℉) Operating Humidity: 10%~95% non-condensing Storage Humidity: 5%~95% non-condensing |
|
| Certifications | ||
| Certifications | FCC, CE | |
| Mechanical | ||
| Mechanical | Install in a Daisy Chain | Up to 3 extenders in a chain |
| Installation |
|
|
| Dimension |
119×85×28 mm 4.69×3.35×1.1 inches |
|
| Casing Material | Metal | |
| Product Weight | 254.5 g (8.98 oz.) | |
| Package Content | ||
| Package Content |
|
|
| Ordering Information | ||
| Ordering Information | Retail Package Dimension |
151×96×40 mm 5.94×3.78×1.57 inches |
| Retail Package Weight | EU: 372.4 g (13.14 oz.) | |
| Units per Carton | 40 | |
| Carton Net Weight | EU: 14.9 kg (32.85 lbs) | |
| Carton Gross Weight | EU: 15.5 kg (34.17 lbs) | |
| Carton Dimension |
44.1×32×21.7 cm 17.36×12.6×8.54 inches |
|
- The actual available power equals the uplink power minus the loss on the line and device’s own power consumption (see the power consumption in the spec sheet). A PoE switch that supports standard IEEE PoE standard at 54 V is recommended.
- 100m extension is measured from the GbE out to the client devices. The section between uplink switch and GbE In is determined by the uplink switch.
- The speed will be limited at 10 Mbps under the Extend/Long-Range mode.