

Procesamiento actualizado
La potente CPU transmite datos en poco tiempo
Procesamiento actualizado
La potente CPU transmite datos en poco tiempo
Super-Fast Wi-Fi in Every Corner

Súper rápido. Súper receptivo.

Cobertura más amplia con más transmisiones
Cinco puertos Gigabit

Más dispositivos, menor latencia

Combos más fáciles en juegos

Conecta más. Manténgase rápido.
Funcionalidades versátiles

Servidor y cliente VPN

Cifrado DNS

Listo para malla Cudy.

Cifrado WPA3

Parental Controls
Parental Controls

Aplicación Cudy
Aplicación Cudy
Versión del modelo | ||
---|---|---|
Versión del modelo | WR3000S 1.0 | |
CPU | ||
CPU | CPU Details | 1.3 GHz Dual-Core, ARM Cortex-A53 |
Memory/Storage | ||
Memory/Storage | Flash/ROM | 128 MB (1 Gbit) NAND |
DDR/RAM | 256 MB (2 Gbit) DDR3 | |
Wireless | ||
Wireless | 5 GHz Wi-Fi Speed | 2402 Mbps |
2.4 GHz Wi-Fi Speed | 574 Mbps | |
5 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) with an Extra Stream | |
2.4 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
Wi-Fi Antennas | 4× Fixed | |
FEM or PA/LNA |
|
|
Beamforming | True | |
Range Performance |
Max: 220 m (722 ft) Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions. |
|
Wall Performance |
Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') or two concrete walls with thickness < 10 cm (4'') |
|
Interfaces | ||
Interfaces | Gigabit RJ45 Ports | 5 |
Ethernet Notes | 1× WAN port, the rest are LAN ports | |
LED |
|
|
Physical Buttons |
|
|
Power Input | DC Jack | |
Power | ||
Power | Power Methods | DC |
DC Input | 12V 1A | |
Power Adapter |
Input: 100 ~ 240 V, 50/60 Hz AC Output: 12V 1A DC |
|
Max Power Consumption (W) | 11.5w | |
Idle Power Consumption (W) | 4.2w | |
Reliability | ||
Reliability | Environment |
|
Certifications | ||
Certifications | FCC, CE | |
Mechanical | ||
Mechanical | Installation |
|
Dimension |
173×123.8×33 mm 6.81×4.87×1.3 inches |
|
Product Weight | 329.4 g (11.62 oz.) | |
Package Content | ||
Package Content |
|
|
Ordering Information | ||
Ordering Information | Retail Package Weight |
|
Retail Package Dimension |
304×268×54 mm 11.97×10.55×2.13 inches |
|
Units per Carton | 20 | |
Carton Dimension |
55.6×55.5×32.5 cm 21.89×21.85×12.8 inches |
|
Carton Gross Weight |
|
|
Carton Net Weight |
|
Versión del modelo | ||
---|---|---|
Versión del modelo | WR3000S 1.0 | |
Wireless | ||
Wireless | Wi-Fi Standards | Wi-Fi 6 |
Max Wi-Fi Modulation | 1024-QAM | |
Wi-Fi Efficiency |
|
|
Max Capacity | 512 | |
Recommended Client Upper Limit | 200 | |
Max Wi-Fi Channel Width | 160 MHz | |
Wi-Fi Security | WPA/WPA2/WPA3 | |
Guest Network | 2.4 GHz, 5 GHz | |
WPS | True | |
General | ||
General | Operation Modes |
|
Mesh | Cudy Mesh | |
Mesh Backhaul |
|
|
Multi-Band Backhaul | True | |
WAN Mode |
|
|
Network | ||
Network | QoS | Per-User Rate Limiting |
DHCP |
|
|
IP Versions | IPv4/IPv6 | |
IPv6 Protocols |
|
|
IPTV/VLAN |
|
|
TTL Customization |
|
|
IGMP |
|
|
Forwarding |
|
|
Firewall |
|
|
Application Layer Gateway |
|
|
Utilities | ||
Utilities | VPN Server |
|
VPN Client |
|
|
VPN Performance |
|
|
DNS Options |
|
|
DNS over TLS Providers |
|
|
Captive Portal | True | |
Wake on LAN | True | |
Online Detection | True | |
Management | ||
Management | Parental Controls |
|
All Devices Management |
|
|
Per-Devices Management |
|
|
Content Management |
|
|
System | ||
System | LED Control | True |
Local Control Method |
|
|
Remote Control Method |
|
|
Firmware Upgrade |
|
|
Reliability |
|
|
Diagnostic Tools |
|
|
Languages |
|
|
Dashboard | ||
Dashboard | Panel |
|
Charts |
|
- El rendimiento de datos inalámbricos real variará como resultado de las condiciones de la red, las limitaciones del cliente y los factores ambientales, incluidos el diseño del edificio, los obstáculos y la ubicación del cliente.
- El rendimiento real de varios dispositivos puede verse afectado por los tipos de aplicaciones utilizadas, el ancho de banda total disponible y las capacidades de sus dispositivos. Conectar dispositivos Wi-Fi antiguos (estándares heredados) puede reducir la eficiencia general. El uso de funciones de eficiencia requiere dispositivos cliente compatibles que también admitan esas funciones. Encuentre más información sobre las funciones de eficiencia admitidas en la sección de software de la hoja de cálculo de Especificaciones.
- El reclamo de cobertura inalámbrica sirve solo como referencia. El rendimiento de la cobertura variará debido a factores ambientales que incluyen la distribución del edificio, los obstáculos, el volumen y la densidad del tráfico y la ubicación del dispositivo. Para una cobertura óptima, coloque el dispositivo en una ubicación central dentro del área que requiera Wi-Fi.