WISP Mode:
In WISP mode, the router allows multiple users to share the internet connection from WISP. The LAN port devices share the same IP from the WISP via the wireless port in this manner. When connected to WISP, the wireless port functions as a WAN port.
Common network topology:
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: The Quick Setup window will pop up, choose "WISP", then go "Next".
Step 3: Choose your "Time Zone".
Step 4: Select the host network you want to extend. Click on 'Connect'.
Or click on General Settings->WISP->Enable and then select the host network you want to extend.
Step 5: Enter the host network's wireless password.
Note: Make sure the wireless password you type in is correct, otherwise, the configuration cannot success.
Step 6: Customize the wireless network name and password or keep them default.
Step 7: Click "Save & Apply" to complete the configuration.
Step 8: Wait a few seconds for the system rebooting, when the login page pops up again, you can enjoy the internet.
103 comentarios
I have the 4GvLTE N300 V3.0
I’ve got firmware 2.5.12 installed, but still no WISP
Could you send me the firmware that allows for Wisp please. I’m happy to test it if it’s Beta.
Hi, can I use the wr1200 to feed wired internet into my lan from a starlink mini wifi router. I would like to not have a wire from the starlink into my existing lan which covers 4 floors of a concrete building. Is this compatible.
Thank you.
@Dear Paulo Ruben Brás Ferreira,
Yes, the AX1500 models will support WISP function if you update it to the latest firmware version. You can download the firmware via the link below.
https://www.cudy.com/pages/download-center/search
“Dear Cudy Support!
Is there any version of the firmware, that supports WISP on AX1500 router?
Thank you and Best regards!”
@Dear Andrej Boyadjiev,
Our technical support has sent you the firmware via email. Please check.
“I cannot see the option for WISP. My router is just bought with SN: WR3600_EU V1.0. As I understand you can send me a firmware update with it. Thank you!”
Dear Cudy Support!
Is there any version of the firmware, that supports WISP on AX1500 router?
Thank you and Best regards!