Shenzhen, China — Cudy has released new firmware for WR1300 and WR3000, adding support for the Captive Portal feature. This enhancement allows users to customize the login experience, reinforce branding, and even set up paid Wi-Fi.
WR1300 and WR3000 users can download the firmware from the support pages and upgrade their devices following the instructions on the configuration page. If you are looking for ways to log in to the config page, please refer to 'How to log into the web interface of Cudy Router?'
Cudy users of AP products, including AP1300, AP3000, AP1200 Outdoor, AP1300 Outdoor, AP3000 Outdoor, and RE1200 Outdoor, can now activate the captive portal feature by pairing their devices with a WR1300 or a WR3000 with the captive portal feature turned on. Other Cudy devices under RE or AP mode will also enable captive portal when connected to the router.
The Cudy router comes embedded with five captive portal providers, and the setup process is quite simple. After creating an account with the providers listed below, users can input the configuration value on the Cudy router’s configuration page to enable the captive portal. You can interact with the UI in the Emulator of WR1300.
- HotspotSystem
- Iron Wi-Fi
- ObiFi
- VulaCoin
- net
- Manual
Disclaimer: When implementing a Captive Portal, it is important to note that the use of third-party Captive Portal solutions may have varying levels of compatibility and security risks. Third-party solutions are at the user's discretion and may require additional configuration and troubleshooting.
Links to Product Pages: WR1300; WR3000
Cudy AP products are also expected to support Captive Portal under standalone mode, eliminating the need for another router as their gateway to enable it. The list includes AP1300, AP1300 Outdoor, AP3000, and AP3000 Outdoor. Beta firmware testing is currently underway.
21 comentarios
@Dear Justin,
You need to install a portal server and radius server to use the manual option. It is too difficult. I suggest you use the current portal service provider, such as the HOTSTOPSYSTEM. It will be easier.
How can I set up the captive portal to just forward to my website? Do I still need pay for a third party? If the answer is manual can you please share the info I would put in to make it work?
@Dear Md Al Amin,
Sorry, WR1300 doesn’t support this feature currently.
“Hello I need captive portal work at lan port also. So my access point also get the same captive portal without additional setting. I’m using cudy wr1300.
I notice captive portal only available on wairless interfaces(2.4g, 5g, guest network etc)”
Hello I need captive portal work at lan port also. So my access point also get the same captive portal without additional setting. I’m using cudy wr1300.
I notice captive portal only available on wairless interfaces(2.4g, 5g, guest network etc)
@Dear Md Al Amin,
What is the model of your Cudy router?
“Hello I need captive portal work at lan port also. So my access point also get the same captive portal without additional setting.”