WISP Mode:
In WISP mode, the router allows multiple users to share the internet connection from WISP. The LAN port devices share the same IP from the WISP via the wireless port in this manner. When connected to WISP, the wireless port functions as a WAN port.
Common network topology:
Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1.
For details, please refer to How to log into the web interface of Cudy Router?
Step 2: The Quick Setup window will pop up, choose "WISP", then go "Next".
Step 3: Choose your "Time Zone".
Step 4: Select the host network you want to extend. Click on 'Connect'.
Or click on General Settings->WISP->Enable and then select the host network you want to extend.
Step 5: Enter the host network's wireless password.
Note: Make sure the wireless password you type in is correct, otherwise, the configuration cannot success.
Step 6: Customize the wireless network name and password or keep them default.
Step 7: Click "Save & Apply" to complete the configuration.
Step 8: Wait a few seconds for the system rebooting, when the login page pops up again, you can enjoy the internet.
83 comments
@Dear Nicolas,
We have plan to add this feature in the near future. Please wait patiently.
“I got aTR3000 router, connecting always with wisp but to several host network (at home and at work). I find so bad that networks setting are not saved ; always need to look for network and enter credentials again. That would be a great help to be able to save (even a few) networks, that router might automatically connect.”
@Уважаемый Артиом,
Наша техническая поддержка отправила вам прошивку по электронной почте. Пожалуйста, проверьте.
“Купил роутер WR6500H а режыма wips нету что делать.
Я покупал cudy tr 3000 там был wips вот он у меня не так уж далеко ловил по wips потому купил WR6500H но wips не оказался в нём.
Не могли бы предоставить прошывку с wips для WR6500H"
I got aTR3000 router, connecting always with wisp but to several host network (at home and at work). I find so bad that networks setting are not saved ; always need to look for network and enter credentials again. That would be a great help to be able to save (even a few) networks, that router might automatically connect.
Купил роутер WR6500H а режыма wips нету что делать.
Я покупал cudy tr 3000 там был wips вот он у меня не так уж далеко ловил по wips потому купил WR6500H но wips не оказался в нём.
Не могли бы предоставить прошывку с wips для WR6500H
@Hi Alex，
Our technical support has sent you the firmware via email. Please check.
“Hello Cudy Support. Could I also get please the beta version of Firmware supporting WISP work mode for the WR3600 router?
Thx”