Industrial Switch
IG1005ES1

Survives Heat, Cold, Surge, and ESD

Built with a industrial-grade design and components, the device achieves Level 4 EMC to withstand surge and ESD from power and Ethernet ports. The industrial-grade ICs, together with extra heatsink design, allow stable operation in extreme temperatures and ensures long-term durability.

Survives Heat, Cold, Surge, and ESD

Built with a industrial-grade design and components, the device achieves Level 4 EMC to withstand surge and ESD from power and Ethernet ports. The industrial-grade ICs, together with extra heatsink design, allow stable operation in extreme temperatures and ensures long-term durability.

Electrical & Physical Robustness

Dual DC Inputs. 9.6-60V Voltage Range.

The switch supports dual DC inputs (9.6–60V) for extra redundant protection. It also includes reverse-polarity and short-circuit protection to ensure stable operation in complex power environments.

Rugged Casing. Reinforced Construction.

The wave-like heatsink not only improves heat dissipation but also enhances structural rigidity. Internally, the PCB and components are reinforced with extra mounting points for anti-vibration supports.

DIP Switches for Flexible Deployment

Web Management for Complete Control

Manage everything through the web panel. When web management is enabled, the switch ignores the other three DIP switches, while all related features remain configurable in the web.

VLAN Isolates Downlink Ports for Improved Safety

Turn on the VLAN mode to prevent client-side hacking, preventing sensitive data from leaking. The downlink clients will only be able to communicate with the uplink devices.

Broadcast Strom Prevention

Keeps the network stable and responsive, reducing downtime caused by misconfigured devices or abnormal traffic.

Extend for 250 m Transmission

For long-distance networking, enable the Extend mode to connect clients
up to 250 meters away by limiting the port speed to 10 Mbps.

L2 Management Features

802.1Q/Port/MTU VLAN

Separate devices into dedicated business VLANs to improve security and network efficiency.

Port Mirroring

Mirror traffic from selected ports to a monitoring port for traffic analysis and troubleshooting.

802.1p/DSCP/Port QoS

Allows you to create rules that prioritize the most latency-sensitive traffic, such as production control commands.

Loop Detection/Prevention

Automatically detects network loops, indicates affected ports with blinking LEDs, and blocks the loop.

1 2

5-Port Gigabit Industrial Easy-Managed Switch with 1 SFP

5-Port Gigabit Industrial Easy-Managed Switch with 1 SFP, IG1005ES1 1.0

IG1005ES1 1.0

A 5-GbE, 1-SFP industrial switch with management features for networking in harsh conditions such as manufacturing, transportation, maritime, oil & gas, and mining.

  • 5× GbE, Shielded, ±6kV Surge Resistant
  • 1× 1.25G SFP
  • IP40, -40~75°C (-40~167°F)
  • Dual DC Inputs, Requires 9.6~60V Power
  • Polarity Reverse Protection
  • Short Circuit Protection
  • Broadcast Storm Prevention On/Off
  • VLAN On/Off
  • Integrated DIN-Rail Bracket
View full details
Model Version
Model Version IG1005ES1 1.0
Interfaces
Interfaces 1.25G SFP Slots 1
Gigabit RJ45 Ports 5
Shielded RJ45 Port
Extend Mode Ports #1~#4 by default, configurable when the Web mode is activated
VLAN Mode Ports #1~#4 by default, configurable when the Web mode is activated
LED
  • Power 1
  • Power 2
  • Link/ACT of Each Ethernet Port
Physical Buttons
  • Reset Button
  • Web On/Off
  • VLAN On/Off
  • Broadcast Storm Prevention On/Off
  • Extend On/Off
Physical Buttons Note When Web On/Off is enabled, the other On/Off toggles will be ignored by the system.
Performance
Performance Max Copper Speed and Distance
  • Cat. 3 or higher cable: 100 meters at 10 Mbps
  • Cat. 5 or higher cable: 100 meters at 100 Mbps
  • Cat. 5e or higher cable: 100 meters at Gigabit
  • Cat. 5e or higher cable: 250 meters at 10 Mbps
Copper Speed and Distance Note 250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated.
Optical Spec and Distance Depends on the Installed Optical Module
MAC Address Table 2048
VLANs 4096
Max Switching Capacity 12.5 Gbps
Max Forwarding Rate 8.929 Mpps
Jumbo Frame 15 KB
Packet Buffer 1 Mbit
Power
Power Power Input Type Power Input Terminal
Power Methods DC via Terminal Block
Power Redundancy Dual Inputs
Power Input 9.6-60V⎓
Max Power Consumption 3.1W
Idle Power Consumption 0.64W
Polarity Reverse Protection
Short Circuit Protection
Switching
Switching 802.3 Protocols
  • 802.3x Flow Control
  • 802.3i 10BASE-T
  • 802.3u 100BASE-TX
  • 802.3ab 1000BASE-T
  • 802.3z 1000BASE-X
  • 802.3az Power Saving
802.1 Protocols
  • 802.1p: LAN Layer 2 QoS/CoS
  • 802.1q: VLAN Bridge Operation
Port Management
  • Port On/Off
  • Port Negotiation Speed
  • Port Trunk (Static Aggregation)
  • Port Mirror
  • Data Rate Limit
  • Jumbo Frame Settings
  • Storm Control
  • Traffic Monitor
  • MAC Address Management
  • EEE (802.3az)
Port Mirror Sessions 2
Port Trunk Groups 2
Max Port Num per Port Trunk Group 4
L2 Features
  • IGMP Snooping
  • Loop Prevention
  • Loop Detection
  • MTU VLAN
  • Port-Based VLAN
  • 802.1Q VLAN
  • DSCP QoS
  • 802.1p QoS
  • Port-Based QoS
Reliability
Reliability Grounding Methods Grounding Point
Safety IEC/EN 62368
EMC EN55032 Class A
EN55035 Class A
EMI FCC 47 CFR Part 15B Class A
EMS IEC/EN 61000-4-2, Level 4 ESD: Contact: 8kV; Air: 15kV
IEC/EN 61000-4-3, Level 4 RS: 80 MHz to 1 GHz: 30 V/m
IEC/EN 61000-4-4, Level 4 EFT: Power: 2kV; RJ45: 4kV
IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 6kV
IEC/EN 61000-4-6, Level 3 CS: 10V
IEC/EN 61000-4-8, Level 5 PFMF
IEC/EN 61000-4-9, Level 5 PMF
IEC/EN 61000-4-10, Level 5 DOMF
EMS Note The levels listed in each EMS field are the highest level defined in the IEC/EN standard.
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
Free Fall IEC 60068-2-32
Environment Operating Temperature: -40 ℃ ~ 75 ℃ (-40 ℉ ~167 ℉)
Storage Temperature: -40 ℃ ~ 85 ℃ (-40 ℉ ~ 185 ℉)
Operating Humidity: 5% ~ 95% non-condensing
Storage Humidity: 5% ~ 95% non-condensing
System
System Control Methods Config Web Page
Firmware Upgrade Local Upgrade
Reliability Backup and Restore
Diagnostic Tools
  • Cable Status/Length Diagnosis
  • Ping
Languages
  • English
  • Bengali
  • German
  • Spanish
  • French
  • Portuguese
  • Russian
  • Arabic
  • Indonesian
  • Hindi
  • Urdu
  • Traditional Chinese
  • Simplified Chinese
Mechanical
Mechanical Dimension Device:
47.5×103×144 mm
1.87×4.06×5.67 inches
Mounting Space:
47.5×147×165 mm
1.87×5.79×6.5 inches
Product Weight 490.7 g (17.31 oz.)
Casing Material Aluminum
Ingress Protection IP40
Installation DIN-Rail
Package Content
Package Content
  • IG1005ES1
  • Installation Guide
Ordering Information
Ordering Information Retail Package Dimension 207×154×75 mm
8.15×6.06×2.95 inches
Retail Package Weight 641.9 g (22.64 oz.)
Units per Carton 20
Carton Net Weight 12.8 kg (28.22 lbs)
Carton Gross Weight 13.7 kg (30.2 lbs)
Carton Dimension 43.9×40.5×33.1 cm
17.28×15.94×13.03 inches